User:Linh N Le/Notebook/2009/08/17: Difference between revisions

From OpenWetWare
< User:Linh N Le‎ | Notebook‎ | 2009‎ | 08
Jump to navigationJump to search
(One intermediate revision by one other user not shown)
Line 17: Line 17:
**Koch also wants the cables to be ~2ft long  
**Koch also wants the cables to be ~2ft long  
*There may also be a problem with strain relief, so we should find a way to connect all 4 of the connections that Koch wants me to setup
*There may also be a problem with strain relief, so we should find a way to connect all 4 of the connections that Koch wants me to setup
*I have 4 cables attached to the module with BNC heads on one end and wired to AI0, AI1, AI2, AI3, and grounds repectively
*The setup will be sitting near my work area (gel area of wetlab)
*[[User:Steven J. Koch|Steve Koch]] 01:47, 18 August 2009 (EDT): Thank you!
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}

Revision as of 22:47, 17 August 2009

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

To Do

  • NI bnc module

DAQ Card

  • Koch got in a new NI BNC module that uses direct wires to hook it up
    • A naked wire goes into the port and then you screw it down
  • Koch wants me to convert this into BNC
    • BNC head on one end and then the naked BNC wires screwed into the device
  • We have to shield the exposed wires with both some tape (or shrink wrap) and maybe a box enclosure in the future
    • Koch also wants the cables to be ~2ft long
  • There may also be a problem with strain relief, so we should find a way to connect all 4 of the connections that Koch wants me to setup
  • I have 4 cables attached to the module with BNC heads on one end and wired to AI0, AI1, AI2, AI3, and grounds repectively
  • The setup will be sitting near my work area (gel area of wetlab)
  • Steve Koch 01:47, 18 August 2009 (EDT): Thank you!
Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Linh_N_Le/Notebook/2009/08/17&oldid=339647"