User:Linh N Le/Notebook/2009/08/17: Difference between revisions
From OpenWetWare
Line 14: | Line 14: | ||
*Koch wants me to convert this into BNC | *Koch wants me to convert this into BNC | ||
**BNC head on one end and then the naked BNC wires screwed into the device | **BNC head on one end and then the naked BNC wires screwed into the device | ||
*We have to shield the exposed wires with both some tape (or shrink wrap) and maybe a box enclosure in the future | |||
**Koch also wants the cables to be ~2ft long | |||
*There may also be a problem with strain relief, so we should find a way to connect all 4 of the connections that Koch wants me to setup | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | ||
|} | |} |
Revision as of 13:20, 17 August 2009
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
To Do
DAQ Card
|