Purpose
- Determine the amount of silver particle that leaks out of film throughout time via silver electrode conducting experiment
Procedure
- From 100Ag-LMT film made on 2013/03/05, three of 0.5g of film in round form were cut out.
- 50mL of pure water were poured into a polypropylene beaker as control. In three separate polypropylene beakers, one film was placed in each beaker, respectively.
- Conductivity measurements in mV were measured for every 30 minutes for a total of 2 hours.
- The conductivity were recorded and plotted.
Results
- The conductivity measurements were recorded below.
Initial [Ag+] [M]
|
Final [Ag+] [M]
|
log [Ag+] []
|
Conductivity [mV]
|
'
|
'
|
Average Conductivity [mV]
|
Standard Deviation [mV]
|
Corrected Conductivity [mV]
|
|
|
|
Trial 1 |
Trial 2 |
Trial 3 |
|
|
|
0 |
0 |
--- |
341.9 |
340.2 |
335.6 |
339.2333333 |
3.259345538 |
0
|
0.000001 |
9.80392E-07 |
-6.008600172 |
328.3 |
329.6 |
331 |
329.6333333 |
1.350308607 |
-9.6
|
0.00001 |
9.80392E-06 |
-5.008600172 |
328.5 |
330.6 |
329.4 |
329.5 |
1.053565375 |
-9.733333333
|
0.0001 |
9.80392E-05 |
-4.008600172 |
357.2 |
359.2 |
359.5 |
358.6333333 |
1.250333289 |
19.4
|
0.001 |
0.000980392 |
-3.008600172 |
417.6 |
417.1 |
416.6 |
417.1 |
0.5 |
77.86666667
|
0.01 |
0.009803922 |
-2.008600172 |
472.8 |
473.3 |
473.6 |
473.2333333 |
0.404145188 |
134
|
0.1 |
0.098039216 |
-1.008600172 |
527.2 |
527.5 |
528 |
527.5666667 |
0.404145188 |
188.3333333
|
|