User:Karlena L. Brown/Notebook/PVOH Research/Entry Base: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 7: Line 7:
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==PVOH Film Preparations==
==PVOH Film Preparations==
# Prepared PVOH films in water:
Prepared PVOH films in water:
** In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)  
* In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)  
** Then, using a graduated cylinder add ~ 3 mL H<sub>2</sub>O to the beaker
* Then, using a graduated cylinder add ~ 3 mL H<sub>2</sub>O to the beaker
** In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
* In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
** Then, using a graduated cylinder add ~ 5 mL H<sub>2</sub>O to the beaker
* Then, using a graduated cylinder add ~ 5 mL H<sub>2</sub>O to the beaker


# Standard PVOH Film Protocol
Standard PVOH Film Protocol
* After adding and combining PVOH (MW 130,000) in small beakers with H<sub>2</sub>O, add stir bars and prepare to stir solution.
* After adding and combining PVOH (MW 130,000) in small beakers with H<sub>2</sub>O, add stir bars and prepare to stir solution.
* On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
* On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
* Once the PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.  
* Once the PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.  


# Notes
Notes
* An additional 2-3 mL H<sub>2</sub>O was added to each solution to aid the dissolving of the PVOH  
* An additional 2-3 mL H<sub>2</sub>O was added to each solution to aid the dissolving of the PVOH  
* Heat was reduced when solutions began to boil too rapidly
* Heat was reduced when solutions began to boil too rapidly

Revision as of 21:58, 31 August 2012

PVOH Research <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page

PVOH Film Preparations

Prepared PVOH films in water:

  • In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)
  • Then, using a graduated cylinder add ~ 3 mL H2O to the beaker
  • In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
  • Then, using a graduated cylinder add ~ 5 mL H2O to the beaker

Standard PVOH Film Protocol

  • After adding and combining PVOH (MW 130,000) in small beakers with H2O, add stir bars and prepare to stir solution.
  • On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
  • Once the PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.

Notes

  • An additional 2-3 mL H2O was added to each solution to aid the dissolving of the PVOH
  • Heat was reduced when solutions began to boil too rapidly
  • When transferring solutions to Teflon dishes, there was loss of sample within the small beakers (sample loss = incomplete sample transfer)



Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Karlena_L._Brown/Notebook/PVOH_Research/Entry_Base&oldid=622049"