User:Karlena L. Brown/Notebook/PVOH Research/2013/03/27: Difference between revisions
From OpenWetWare
Line 7: | Line 7: | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
==OBJECTIVES== | ==OBJECTIVES== | ||
* Remove all excess oil from microsphere samples prepared on 03/20/13 and 03/22/13 | * Remove all excess oil from microsphere samples prepared on '''03/20/13''' and '''03/22/13''' | ||
* Clean and dry microsphere samples with hexanes prepared 03/20/13 and 03/22/13 (dissolving excess mineral oil) | * Clean and dry microsphere samples with hexanes prepared '''03/20/13''' and '''03/22/13''' (dissolving excess mineral oil) | ||
==Microspheres: Separation & Vacuum Filtration Procedures== | ==Microspheres: Separation & Vacuum Filtration Procedures== | ||
'''RECALL SEPARATION AND VACUUM FILTRATION PROTOCOL ON 3/08/13''' | '''RECALL SEPARATION AND VACUUM FILTRATION PROTOCOL ON 3/08/13''' |
Revision as of 18:18, 8 April 2013
PVOH Research | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
OBJECTIVES
Microspheres: Separation & Vacuum Filtration ProceduresRECALL SEPARATION AND VACUUM FILTRATION PROTOCOL ON 3/08/13 For the Protocol originally discussed on 03/08/13, some modifications that occurred included: * A vacuum filter system is no longer being used, instead the oil is being decanted off before washing with hexanes * Samples are being shaken vigorously for ~ 1 min before allowing to sit and settle for ~ 3 min * After decanting off the excess hexane added to dissolve the excess oil in each sample, the samples are being set aside to air dry Notes
|