User:Karlena L. Brown/Notebook/PVOH Research/2013/03/08: Difference between revisions
From OpenWetWare
Line 11: | Line 11: | ||
==Microspheres: Separation & Vacuum Filtration Procedures== | ==Microspheres: Separation & Vacuum Filtration Procedures== | ||
'''Setup of a vacuum filtration system:''' | |||
* Clean 250mL Erlenmeyer Filter Flask | |||
* Large Buchner Funnel | |||
* Whatman #42 Filter Paper | |||
* Long Secure Rubber Hose | |||
# Take a microsphere sample out of its container using a pair of tweezers | |||
# Place a piece of filter paper into the Buchner funnel, then filter the microsphere using the vacuum filtration system setup | |||
# Attach all parts of the apparatus to the vacuum filtrator system | |||
# Place a piece of Whatman #42 filter paper in the Buchner Funnel | |||
# Turn on the vacuum filtrator system | |||
# Check the suction rate to ensure that enough pressure is applied | |||
# Place the microsphere sample into the Buchner funnel | |||
# Allow the vacuum filtration to continue until the microsphere is completely dry | |||
# To continuously remove the oil integrated within the microsphere sample, wash the microspheres with hexanes repeatedly | |||
# Once the microspheres are completely dehydrated and cleaned with hexanes, place microsphere samples in new small labeled vial | |||
# Allow microspheres to dry for ~ 1 day | |||
# Wash all glassware and equipment first with H<sub>2</sub>O and then with acetone for later use | |||
==Notes== | ==Notes== |
Revision as of 12:42, 24 March 2013
PVOH Research | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
OBJECTIVES
Microspheres: Separation & Vacuum Filtration ProceduresSetup of a vacuum filtration system: * Clean 250mL Erlenmeyer Filter Flask * Large Buchner Funnel * Whatman #42 Filter Paper * Long Secure Rubber Hose
Notes |