The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
PVOH Research
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>
|
PVOH Film Preparations
Prepared PVOH films in water:
- In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)
(Actual Mass = 0.4934g)
- Then, using a graduated cylinder add ~ 3 mL H2O to the beaker
- In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
(Actual Mass = 0.9965g)
- Then, using a graduated cylinder add ~ 5 mL H2O to the beaker
Standard PVOH Film Protocol:
- After adding and combining PVOH (MW 130,000) in small beakers with H2O, add stir bars and prepare to stir solution.
- On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
- Once PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.
Notes:
- An additional 2-3 mL H2O was added to each solution to aid the dissolving of the PVOH
- Heat was reduced when solutions began to boil too rapidly
- While transferring solutions to Teflon dishes, loss of sample within the small beakers (sample loss = incomplete sample transfer)
|