The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
PVOH Research
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>
|
OBJECTIVES
- Prepare PVOH films for Acetylation Reactions
Acetylation Reaction Protocol & Film Preparation
- In 10mL beaker, weigh out ~ 1.0 grams PVOH (MW 22K)
- Then, using a graduated cylinder add ~ 5 mL H2O to the beaker
- After adding and combining PVOH (MW 22K) in a small beaker with H2O, add a stir bar and prepare to stir solution
- On hot plate, stir and heat beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves
- Once PVOH solids thoroughly dissolve in solution, add a small portion of acetic acid (HoAc)
- In addition, add ~2 drops of HCl to the solution and continue to stir for an hour
- Allow the solution to cool and prepare for titration
REPEAT PROCEDURE ABOVE FOUR TIMES TO PREPARE FOUR FILMS
PVOH Mass (g)
|
Acetic Acid (mL)
|
Hydrochloric Acid (drops)
|
1.0062 |
1.30 |
2
|
1.0043 |
0.26 |
2
|
1.0052 |
0.52 |
2
|
1.0027 |
0.78 |
2
|
Acetylation Reaction Film Preparation
Acetylation Reaction Calculations
|