User:Karlena L. Brown/Notebook/PVOH Research/2012/10/31: Difference between revisions
From OpenWetWare
(→Notes) |
|||
Line 73: | Line 73: | ||
* Experimental readings regarding the Ion Selective Electrode Analysis were taken every 30 minutes; however, for the first reading and recording only a 10 min interval surpassed before a reading was taken. | * Experimental readings regarding the Ion Selective Electrode Analysis were taken every 30 minutes; however, for the first reading and recording only a 10 min interval surpassed before a reading was taken. | ||
* The final two readings germane to the Ion Selective Electrode Analysis for the PVOH 22K film containing 1mL glutaldehyde that was exchanged for 10 min with CuSO<sub>4</sub> were taken by Dr. Fox. | * The final two readings germane to the Ion Selective Electrode Analysis for the PVOH 22K film containing 1mL glutaldehyde that was exchanged for 10 min with CuSO<sub>4</sub> were taken by Dr. Fox. | ||
* A small leak was detected in the film used after several hours had passed (9:00P). | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> |
Revision as of 01:42, 24 November 2012
PVOH Research | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OBJECTIVESFilms Examined using FTIRIon Selective Electrode Film ProceduresISE Film Analysis: Varied Ion SolutionA crosslinked PVOH 22K film containing 1mL glutaldehyde that had been exchanged for 10 min in the CuSO4 solution was used for an Ion Selective Electrode Analysis.
ISE Film Analysis: HPLC Grade H2O SolutionA crosslinked PVOH 22K film containing 1mL glutaldehyde that had been exchanged for 10 min in the CuSO4 solution was used for an Ion Selective Electrode Analysis.
Notes
|