# User:Karlena L. Brown/Notebook/PVOH Research/2012/10/17

(Difference between revisions)
 Revision as of 22:28, 23 November 2012 (view source) (→UV-Vis of Porphyrin Solutions)← Previous diff Revision as of 22:47, 23 November 2012 (view source) (→Porphyrin Dilution Calculations)Next diff → Line 50: Line 50: ==Porphyrin Dilution Calculations== ==Porphyrin Dilution Calculations== + + * Solution of 94.45 μM porphyrin + (94.45 μM)(V1)=(9.445 μM)(10mL) + V1 = 1mL of 94.45 μM porphyrin + + * Solution of 9.445 μM porphyrin + (9.445 μM)(V1)=(944.5 nM)(10mL) + V1 = 1mL of 9.445 μM porphyrin + + * Solution of 944.5 nM porphine + (944.5 nM)(V1)=(94.45 nM)(10mL) + V1 = 1mL of 944.5 nM porphyrin + + * Solution of 944.5 nM porphyrin + (944.5 nM)(V1)=(9.445 nM)(10mL) + V1 = 0.1mL of 944.5 nM porphyrin + + * Solution of 94.45 μM porphyrin + (94.45 μM)(V1)=(1.89 μM)(10mL) + V1 = 0.2mL of 94.45 μM porphyrin + + * Solution of 94.45 uM porphyrin + (94.45 μM)(V1)=(3.78 μM)(10mL) + V1 = 0.4mL of 94.45 μM porphyrin ==UV-Vis of Porphyrin Solutions== ==UV-Vis of Porphyrin Solutions==

## Revision as of 22:47, 23 November 2012

PVOH Research Main project page
Previous entry      Next entry

## OBJECTIVES

• Make PVOH films with NaMT, 50% CEC NaMT, & 100% CEC NaMT for Cu2+ film adsorption
• Measure UV-Vis of all porphyrin solutions (9.445nM – 9.445μM)
• Make PVOH films containing tetra (4-sulfonatophenyl) porphine dihydrogen chloride (PORPHYRIN)

## Preparations For Cu2+ Film Exchanged Solutions & Vacuum Filtration Procedures

Follow procedural protocol for Cu2+ film exchanged solutions & vacuum filtration procedures 10/05/12; however, instead of using clay, use 1.0g films prepared containing PVOH, glutaldehyde, and clay samples. In addition, only exchange films for solely 10min time interval.

 Films Prepared Original Film Mass (g) Film Mass After 10min Exchange (g) PVOH 22K 0.9000 0.7582 PVOH 22K w/ NaMT 0.9945 0.9115 PVOH 22K w/ 50% CEC NaMT 1.1167 1.0464 PVOH 22K w/ 100% CEC NaMT 1.1480 1.0041

## UV - Vis Procedures

1. Open UV-Vis Pro program on the computer
2. Hit the UV-Vis switch at the bottom of the computer setup
3. On the bottom of computer screen, click connect button
4. Go through UV-Vis Safety Connection Procedures and Protocols for ~ 15 min
5. Once finished safety protocol run, click method button
6. Select a instrument scanning range (wavelengths = 200 - 800nm)
7. Click data window button to create new folder → CHEM 581 → MKM
8. Create name for sample run under new folder MKM
9. Prepare a baseline (blank) sample to run in UV-Vis
10. Use quartz cuvette specially made for UV-Vis and fill cuvette ¾ full with HPLC grade H2O
11. Wipe quartz cuvette gently and thoroughly with a Kim Wipe
12. Place cuvette in reference pocket of six sample UV-Vis instrument
13. Approve selection and file name then click baseline button
14. Run baseline of blank sample (HPLC grade H2O)
15. Once finished running, autoscale the y-axis on the screen until max absorption = 1.0
16. Save sample name under new folder MKM

Repeat procedure for all UV-Vis Samples run; however, do not have to run a baseline every time after each sample. Baseline only has to be run once throughout the total analysis. Also please be sure to clean each cuvette and wipe thoroughly each time before running new samples for analysis. In addition, place actual samples that are not references in the first pocket of six sample holder in UV-Vis.

## Porphyrin Dilution Calculations

• Solution of 94.45 μM porphyrin
```   (94.45 μM)(V1)=(9.445 μM)(10mL)
V1 = 1mL of 94.45 μM porphyrin
```
• Solution of 9.445 μM porphyrin
```   (9.445 μM)(V1)=(944.5 nM)(10mL)
V1 = 1mL of 9.445 μM porphyrin
```
• Solution of 944.5 nM porphine
```   (944.5 nM)(V1)=(94.45 nM)(10mL)
V1 = 1mL of 944.5 nM porphyrin
```
• Solution of 944.5 nM porphyrin
```   (944.5 nM)(V1)=(9.445 nM)(10mL)
V1 = 0.1mL of 944.5 nM porphyrin
```
• Solution of 94.45 μM porphyrin
```   (94.45 μM)(V1)=(1.89 μM)(10mL)
V1 = 0.2mL of 94.45 μM porphyrin
```
• Solution of 94.45 uM porphyrin
```   (94.45 μM)(V1)=(3.78 μM)(10mL)
V1 = 0.4mL of 94.45 μM porphyrin
```

## UV-Vis of Porphyrin Solutions

• Using a Shimadzu UV-2550 spectrophotometer, spectra of four concentrations of porphyrin solutions were taken:
``` * Wavelength range = 200 - 800nm
* Slit width = 1.0nm
```

## UV-Vis Analysis Notes

• The baseline was conducted with nothing in the cell.
• For solutions at concentrations 944.5nM and 94.45nM, two peaks were visible at 410nm and 430nm.
• The 9.445nM was not concentrated enough to produce any peaks.
• The 944.5nM solution displayed several more peaks past 500nm, producing more useful data.
• The concentrations of 31.48μM and 62.97μM proved to be too high in concentration; absorbency values were greater than 1.0 for each solution.

## Porphyrin Film Preparations

Follow procedural protocol for preparing glutaldehyde films 9/25/12; however, add ~ 1mL of porphyrin in addition to glutaldehyde for each film before pouring substance into a Teflon dish.

 Films Prepared PVOH 22K Amount (g) Glutaldehyde Amount (mL) Porphyrin Amount (mL) PVOH 22K w/ GA & PP(g) 1.0073 1.0 1.0 PVOH 22K w/ GA & PP(g) 1.0067 1.0 1.0 PVOH 22K w/ GA & PP(g) 1.0523 0.5 1.0 PVOH 22K w/ GA & PP(g) 1.0211 0.5 1.0