User:Karlena L. Brown/Notebook/PVOH Research/2012/10/09: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
(Autocreate 2012/10/09 Entry for User:Karlena_L._Brown/Notebook/PVOH_Research)
 
Line 6: Line 6:
| colspan="2"|
| colspan="2"|
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==PVOH Film Preparations==
==OBJECTIVES==
'''Prepared PVOH films in water:'''
 
* In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)
'''(Actual Mass = 0.4934g)'''
* Then, using a graduated cylinder add ~ 3 mL H<sub>2</sub>O to the beaker
* In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
'''(Actual Mass = 0.9965g)'''
* Then, using a graduated cylinder add ~ 5 mL H<sub>2</sub>O to the beaker


'''Standard PVOH Film Protocol:'''
* After adding and combining PVOH (MW 130,000) in small beakers with H<sub>2</sub>O, add stir bars and prepare to stir solution.
* On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
* Once PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.


'''Notes:'''
'''Notes:'''
* An additional 2-3 mL H<sub>2</sub>O was added to each solution to aid the dissolving of the PVOH
* Heat was reduced when solutions began to boil too rapidly
* While transferring solutions to Teflon dishes, loss of sample within the small beakers (sample loss = incomplete sample transfer)





Revision as of 17:24, 22 October 2012

PVOH Research <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

OBJECTIVES

Notes: