User:James C. Schwabacher/Notebook/CHEM-571/2013/10/16

From OpenWetWare

< User:James C. Schwabacher | Notebook | CHEM-571 | 2013 | 10(Difference between revisions)
Jump to: navigation, search
(Autocreate 2013/10/16 Entry for User:James_C._Schwabacher/Notebook/CHEM-571)
Current revision (11:15, 17 October 2013) (view source)
(Data)
 
(5 intermediate revisions not shown.)
Line 11: Line 11:
==Objective==
==Objective==
-
Learn how to maintain an OpenWetWare Notebook.
+
To test the activity of our HRP-NPs for the catalytic conversion of luminol.
-
==Description==
+
==Procedure==
-
# Add experimental record here. Include what, how, and why...
+
'''Creating the Luminol-H<sub>2</sub>O<sub>2</sub> Solution'''
 +
# Add 969.61 μL of the luminol stock and 1.598 mL of the hydrogen peroxide stock to a 10 mL volumetric flask.  
 +
# Dilute the solution to 10 mL with buffer.
-
==Data==
+
'''Enzyme Kinetics Measurement'''
-
* Add data and results here...
+
# Add 2 mL of the luminol-H<sub>2</sub>O<sub>2</sub> solution to a cuvette.
 +
# Start kinetics measurement:
 +
:* 1 ms integration
 +
:* 10 scan average
 +
:* Set "Save the first available scan every" to 15 seconds
 +
:* Set "Stop after this amount of time" to 10 minutes
 +
:* Set "File Type" to Tab Delimited
 +
:* Just before 1 minute, add 1 mL of 60:1 Au:HRP solution.
-
==Notes==
+
'''BSA-AuNP Synthesis'''
-
This area is for any observations or conclusions that you would like to note.
+
# Add 1.00 mL of 2.33 mM gold solution (HAuCL<sub>4</sub>) to a 10 mL volumetric flask.
 +
# Add 1.73 mL BSA (90x more gold than BSA) to the volumetric flask.
 +
# Dilute the solution up to 10 mL with deionized water.
 +
# Transfer the solution to a test tube and cap with aluminum foil.
 +
# Heat in the oven at 80°C for four hours.
 +
# Transfer the solution to a plastic falcon tube.
 +
'''Remaking the Solution of Gold and HRP'''
 +
# For 60:1 Au:HRP solution, 2.56 mL HRP stock and 850.34 μL of gold stock were added to a 10 mL volumetric flask. The solution was diluted up to 10 mL with deionized water.
 +
# The 10 mL solution of gold and HRP was placed into a test tube.
 +
# The test tube was placed in the oven at 80°C for four hours.
-
Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.
+
==Data==
-
 
+
[[Image:Cmj_HRPKineticsUV-Vis_10.16.2013.png ]]
-
[[Category:Course]]
+
*Note: Spectra overlap for a total elapsed time of 19 minutes.
-
[[Category:Miscellaneous]]
+
[[Image:Cmj_HRPKinetics_520overtime_10.16.2013.png]]
 +
==Notes==
 +
* The buffer was 5.1 mM Tris at pH 8.
 +
* The stock concentration of luminol was 1.46 mM.
 +
* The stock concentration of hydrogen peroxide was 44.29 mM.
 +
* The stock concentration of gold (HAuCL<sub>4</sub>)was 2.33 mM.
 +
* The stock concentration of BSA was 15 μM.
 +
* The stock solution of gold was 2.94 mM.
 +
* The stock solution of HRP was 16.27 μM.
 +
[[Category:CHEM571]]
 +
[[Category:horseradish peroxidase]]
 +
[[Category:luminol]]
-
[[Category:Course]]
 
-
[[Category:Miscellaneous]]
 

Current revision

Biomaterials Design Lab Main project page
Previous entry      Next entry



Objective

To test the activity of our HRP-NPs for the catalytic conversion of luminol.

Procedure

Creating the Luminol-H2O2 Solution

  1. Add 969.61 μL of the luminol stock and 1.598 mL of the hydrogen peroxide stock to a 10 mL volumetric flask.
  2. Dilute the solution to 10 mL with buffer.

Enzyme Kinetics Measurement

  1. Add 2 mL of the luminol-H2O2 solution to a cuvette.
  2. Start kinetics measurement:
  • 1 ms integration
  • 10 scan average
  • Set "Save the first available scan every" to 15 seconds
  • Set "Stop after this amount of time" to 10 minutes
  • Set "File Type" to Tab Delimited
  • Just before 1 minute, add 1 mL of 60:1 Au:HRP solution.

BSA-AuNP Synthesis

  1. Add 1.00 mL of 2.33 mM gold solution (HAuCL4) to a 10 mL volumetric flask.
  2. Add 1.73 mL BSA (90x more gold than BSA) to the volumetric flask.
  3. Dilute the solution up to 10 mL with deionized water.
  4. Transfer the solution to a test tube and cap with aluminum foil.
  5. Heat in the oven at 80°C for four hours.
  6. Transfer the solution to a plastic falcon tube.

Remaking the Solution of Gold and HRP

  1. For 60:1 Au:HRP solution, 2.56 mL HRP stock and 850.34 μL of gold stock were added to a 10 mL volumetric flask. The solution was diluted up to 10 mL with deionized water.
  2. The 10 mL solution of gold and HRP was placed into a test tube.
  3. The test tube was placed in the oven at 80°C for four hours.

Data

Image:Cmj_HRPKineticsUV-Vis_10.16.2013.png

  • Note: Spectra overlap for a total elapsed time of 19 minutes.

Image:Cmj_HRPKinetics_520overtime_10.16.2013.png

Notes

  • The buffer was 5.1 mM Tris at pH 8.
  • The stock concentration of luminol was 1.46 mM.
  • The stock concentration of hydrogen peroxide was 44.29 mM.
  • The stock concentration of gold (HAuCL4)was 2.33 mM.
  • The stock concentration of BSA was 15 μM.
  • The stock solution of gold was 2.94 mM.
  • The stock solution of HRP was 16.27 μM.




Personal tools