The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
 MOF: Tara
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>
|
DPNI
- 1.) Add solids 1,4,5,8 Naphthalenetetracarboxylic dianhydride (.4025 g, 3.00 mmol) and 4-aminopyridine (.4235 g, 6.00 mmol)to round bottom flask
- 2.) Add 75 mL of solvent (DMA) ~keep under hood~
- 3.) Add Stir Bar to solution
- 4.) Put under spout and raise black knob until there is enough pressure to hold it in place
- 5.) Begin to stir
- 6.) If attached to condenser, turn on water very slightly
- 7.) Turn on nitrogen: ensure bubbles are about 1 every 4 seconds. (Turn little end of nossle up)
- 8.) Turn on heat to 40, switch down accordingly until it reaches 135 degrees consistently.
______________________________________________________________________________________________________
04-03-13
- 9.) Turn off nitrogen and water, Cool to Room Temperature
- 10.) Filter out solid using diethyl ether
- 11.) NMR in Chloroform (See Image Below)
|
MOF: Tara
