User:Ellen Petersen/Notebook/MOF/2012/04/16: Difference between revisions
From OpenWetWare
(Autocreate 2012/04/16 Entry for User:Ellen_Petersen/Notebook/MOF) |
|||
Line 6: | Line 6: | ||
| colspan="2"| | | colspan="2"| | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
== | ==April 16, 2012== | ||
* | * 1.) Add solids 1,4,5,8 Naphthalenetetracarboxylic dianhydride (.805 g, 3.00 mmol) and 4-aminopyridine (.847 g, 6.00 mmol)to round bottom flask | ||
* 2.) Add 150 mL of solvent (DMA) ~keep under hood~ | |||
* 3.) Add Stir Bar to solution | |||
* 4.) Put under spout and raise black knob until there is enough pressure to hold it in place | |||
* 5.) Begin to stir | |||
* 6.) Vacuum out oxygen : turn big end of nossle up, observe that solution does react | |||
* 7.) Turn off vacuum and turn on nitrogen: turn little end of nossle up. Bubbles in back should appear, this means nitrogen is on | |||
* 8.) Turn on heat to 56, switch down accordingly until it reaches 135 degrees consistently. | |||
* 9.) If solution seems to be boiling adjust and turn down | |||
*10.) Solution stable at 133 degrees at 51, mark red line on it to see difference in solution level. | |||
Revision as of 21:33, 4 February 2013
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html> |
April 16, 2012
|