User:Dominique Brager/Notebook/481 Notebook/2016/09/16: Difference between revisions
From OpenWetWare
(→Data) |
|||
(5 intermediate revisions by the same user not shown) | |||
Line 12: | Line 12: | ||
==Objective== | ==Objective== | ||
*Make beads using the large batch profile. Use clay solution to have a 20% clay in film composite | *Make beads using the large batch profile. Use clay solution to have a 20% clay in film composite | ||
*Run | *Run DSC on previously crosslinked films | ||
*Prepare beads using 10% activated carbon instead of the clay. | *Prepare beads using 10% activated carbon instead of the clay. | ||
==Description== | ==Description== | ||
*20% clay beads: | |||
1.25g PVA | |||
= | 1.25g PVA/4 = 0.3125g | ||
0.3125g Bentonite * 97ml solution/3g bentonite = 10.1 mL bentonite solution | |||
55mL solution - 10 mL bentonite solution - 15mL HCL: 30 mL H<sub>2</sub>O | |||
:*Create a solution of 1.25 g PVA, 10mL bentonite solution, and 15 mL conc HCl. | |||
:*Place this solution on a hot plate and heat/stir until everything has dissolved. | |||
:*Add 5 mL of this solution to a 50 mL solution of ethyl acetate stirring at 240 rpm in a dropwise manner. | |||
:*Add 0.5 mL of glutaraldehyde and stir at 260 rpm for 3 minutes. | |||
:*After 3 minutes, add 0.5 mL of glutaraldehyde and stir at 300 rpm for 2 minutes. | |||
:*After 7 minutes, add 7 mL of sodium bicarbonate and stir for 30 seconds. | |||
*Activated Carbon Beads | |||
:* Same procedure as above using 2.5g PVA, 0.275 g Activated Carbon, 30mL 10% HCl. | |||
*DSC run on: | |||
:*PVOH | |||
:*PVOH film with 10% bentonite from powder | |||
:*PVOH film with 10% bentonite from solution | |||
:*PVOH Beads with 10% clay solution | |||
==Data== | |||
[[Image:PVOH_neat.jpg|600px]] | |||
==Notes== | |||
Both activated carbon and 20% beads formed well into many small beads. | |||
Beads put in the oven for DSC came out black due to acid left over. This may have crosslinked them even more. | |||
__NOTOC__ | __NOTOC__ |
Revision as of 14:42, 22 September 2016
Biomaterials Design Lab | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Objective
Description
1.25g PVA 1.25g PVA/4 = 0.3125g 0.3125g Bentonite * 97ml solution/3g bentonite = 10.1 mL bentonite solution 55mL solution - 10 mL bentonite solution - 15mL HCL: 30 mL H2O
DataNotesBoth activated carbon and 20% beads formed well into many small beads. Beads put in the oven for DSC came out black due to acid left over. This may have crosslinked them even more.
|