User:David Johnston Monje/Protocols
From OpenWetWare
Jump to navigationJump to search
Home | Lab | Project | Protocols | Notebook | Links |
---|
Sterilization and microbial culturing
Corn/Teosinte Seed Surface Sterilization Protocol
- Soak 20 seeds in dH2O for 12 hours (teosinte seeds should be soaked in 5% H2O2 instead to break dormancy)
- Drain H2O and add Sunlight dish soap + water to the container and seeds and wash for 10 minutes in shaking water bath
- Drain the soapy water and add 2.5% sodium hypochlorite to cover the seeds. Wash for 10 minutes.
- Drain the bleach, and add 5% sodium hypchlorite to cover the seeds. Wash 5 minutes.
- Drain the bleach and do 3 thirty second washes with distilled water. For teosinte, do an additional 5 minute wash with 70% ethanol to completely surface sterilize the seed.
- To test for sterility, momentarily place the seeds on R2A media and culture that at 25 degrees for 10 days.
- Germinate seed in the dark at 25 degrees for 7 days by placing in 25 x 100 mm culture tubes containing 10 mL of 6 g/L, pH 6 agar or 10 mL of well watered soil.
Corn/teosinte growth, surface sterilization, and endophyte isolation protocol
- Sterilize 20 seed and germinate in culture tubes on water agar or soil.
- After seeds germinate, place tubes in a controlled growth chamber, with an average relative humidity of 50%, under a light intensity of 100 µmol photons m-2s-1, provided by fluorescent and incandescent bulbs, and having a photoperiod of 16-hrs daylight and a 24ºC: 16ºC (light: dark) temperature cycle.
- Observe plant growth for 1 to two weeks and harvest when plants reach the V2 growth stage (2 or three full leaves). Water agar grown plants will not be surfaced sterilized so proceed to step 11.
- In sterile conditions, remove individual plants, gently wash off visible soil in tap water and place the plant in a 100 mL pyrex bottle. Add water and 1 mL of sunlight soap to cover the plant. Wash in shaker for 10 minutes.
- Drain the water, and replace (covering the plant) with 2.5% bleach. Wash for 10 minutes.
- Drain the water/bleach and add 5% bleach to cover the plant. Wash for 5 minutes.
- Drain the bleach and do 3 thirty second washes with distilled water.
- To ensure surface sterility, add 70% ethanol and conduct an additional 10 minute wash with 70% ethanol to completely surface sterilize the plant.
- Finally, do one more 30 second wash with distilled water.
- To test for sterility, momentarily place the plant roots on R2A media and culture that at 25 degrees for 10 days.
- To isolate endophytes, thoroughly grind the plant (root, shoot, and embryonic seed) in an autoclaved mortar and pestle. Add 1 mL of sterile phosphate buffer to the homogenate and reserve 1 mL for DNA extraction (for TRFLP).
- For culturing dilute the sample by taking 50 ul of juice from the homogenate, and add to 450 ul of sterile buffer in a eppendorf tube.
- Serially dilute the sample by reisolating 50 ul of from the first tube, to a second containing 450 ul of sterile buffer, and then to a third to a final dilution of 1000 X.
- Plate 100 ul of 1000X dilution on LGI, ½ PDA, and R2A (with cyclohexamide) filled petri dishes. Culture at 25 degrees for 10 days.
Carboxymethylcellulose(CMC)Agar Medium
- 0.2% carboxymethylcellulose (CMC) sodium salt, 0.2% NaNO3, 0.1% K2HPO4, 0.1% MgSO4, 0.1% KCl, 0.05% peptone, 0.1% triton X-100 and 1.7% agar
- This was adjusted to pH 6 then autoclaved and poured into 150 mm plates
- Similar to that used in : http://www.springerlink.com/content/q7g54721205r26k3/fulltext.html
Pectin Agar Medium
- 0.2%(w/v) of citrus pectin 0.2% NaNO3, 0.1% K2HPO4, 0.1% MgSO4, 0.1% KCl, 0.2% carboxymethylcellulose (CMC) sodium salt, 0.05% peptone, 0.1% triton X-100 and 1.7% agar
- This was adjusted to pH 6 then autoclaved and poured into 150 mm plates
RNA rich Agar Medium
- 1.5 g of torula yeast RNA was dissolved in 1 mL of 0.1 M PO at pH 8 and filter sterilized with a 0.22 um filter.
- This sterilized RNA was added to 250 mL of autoclaved R2A agar media and poured into 150 mm plates.
- After 5-7 days of microbial growth, plates were flooded with perchloric acid for 5 minutes and scored for clear halo production around colonies.
- Ref: BARC Newsletter Issue No. 24, Founder's Day Special Issue 91. http://barc.gov.in/webpages/letter/2004/200410-13.pdf
Mineral Phosphate Solubilization Agar
- 10 g/L glucose + 0.373 g/L NH4NO3 + 0.41 g/L MgSO4 + 0.295 g/L NaCL + 0.003 FeCL3 + 0.7 g/L CaHPO4 + 20 g/L agar
- This was adjusted to pH 6 then autoclaved and poured into 150 mm plates
- Reference : http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6T3C-41PNYNT-7&_user=1067211&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000051237&_version=1&_urlVersion=0&_userid=1067211&md5=1ba0dfc48ab1c3e9a86a73ab85e16484