User:Andrew W Long/Notebook/CHEM-671 Research/2015/09/23: Difference between revisions
From OpenWetWare
(Autocreate 2015/09/23 Entry for User:Andrew_W_Long/Notebook/CHEM-671_Research) |
|||
Line 6: | Line 6: | ||
| colspan="2"| | | colspan="2"| | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
== | ==Differential Scanning Calorimetry of AuNP Fibers== | ||
First, AuNP fibers were prepped in the following way. First, ten 5mL samples of AuNP fibers were transferred into five 15mL tubes (aka there were two 5mL samples per tube). The resulting tubes were then centrifuged at 4000 rpm for 5min. | |||
Next, the four differential scanning calorimetry (DSC) samples were prepped in the following way: | |||
*Sample 1: AuNP fibers (3.49mg), lid and pan mass (51.37mg). Total mass = 53.73mg | |||
*Sample 2: AuNP fibers (4.43mg), lid and pan mass (50.80mg). Total mass = 53.74mg | |||
*Sample 3: AuNP fibers (3.63mg), lid and pan mass (50.71mg), Total mass = 54.44 mg | |||
*Control (lysozyme): Lysozyme (3.04mg), lid and pan mass (51.237mg). Total mass = 54.38mg | |||
Sample 1 was placed in well 27 in the DSC. Samples 2, 3 and 4 were placed in wells 28, 29 and 30. The procedure for the DSC is as follows: | |||
*Equilibrate at 20°C | |||
*Ramp up to 5°C/min and to 100°C. | |||
*Isothermal - 3 mins | |||
*Ramp down to 5°C/min and to 20°C | |||
*Repeat (blue arrow) | |||
*Lastly, external event (OFF) | |||
More detailed directions can be found [[User:Matt_Hartings/Notebook/AU_Biomaterials_Design_Lab/2015/09/23|here in Dr. Harting's notebook.]] | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> |
Revision as of 16:18, 4 October 2015
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Differential Scanning Calorimetry of AuNP FibersFirst, AuNP fibers were prepped in the following way. First, ten 5mL samples of AuNP fibers were transferred into five 15mL tubes (aka there were two 5mL samples per tube). The resulting tubes were then centrifuged at 4000 rpm for 5min. Next, the four differential scanning calorimetry (DSC) samples were prepped in the following way:
Sample 1 was placed in well 27 in the DSC. Samples 2, 3 and 4 were placed in wells 28, 29 and 30. The procedure for the DSC is as follows:
More detailed directions can be found here in Dr. Harting's notebook. |