Streptavidin purification of DNA fragments

From OpenWetWare
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Biotin Primers

  • Make primers for PCR reactions with a 5' biotin modification
    • HPLC or PAGE purification of these primers is desirable to eliminate short primers and ones without a biotin tag
    • Virtually all oligo manufacturers can supply 5' biotin
    • An alternative is to make 5' amine primers and link biotin to the amine group

PCR Reaction

  • Normal PCR reaction conditions apply.
  • Approximately 1 pmol/μl biotinylated primer should be used.


  • 100 μl reaction
  • 100 μl PCR Supermix High Fidelity (Invitrogen)
  • 1.5 μl Suffix-FB biotinylated primer (30 pmol/μl)
  • 1.5 μl Prefix-RB biotinylated primer (30 pmol/μl)
  • 0.5 μl diluted plasmid backbone template DNA (10 ng/μl)


  • Cycle 36x
  • initial denature 95° 2 min
  • 36 cycles
    • 95° 20 sec
    • 62° 20 sec
    • 68° 4:00 min
  • final extension 68° 20 min

Post PCR Cleanup

  • Elimination of PCR enzymes and dNTPs is required prior to enzymatic cutting
  • Add 1 μl Proteinase-K
  • digest at 50° for 1 hour
  • heat kill Proteinase K at 80° for 20 minutes
  • Add 5x (500 μl) Qiagen buffer PB, vortex
  • Spin in Qiagen column at 8000g 1 minute
  • Pour flow through back into the column, spin again
  • Discard flow through, add 500 μl buffer PB, spin again
  • Discard flow through, add 750 μl wash PE, spin again
  • Discard flow through, add 750 μl wash PE, spin again
  • Discard flow through, spin again at 12000g, 2 minutes to dry
  • Transfer column to a clean 1.7 ml tube, add 30 μl EB heated to 50°, spin at 8000g 1 minute
  • Add a further 30 μl EB, spin again
  • Discard the column and retain the eluted DNA
  • measure yield with the Nanodrop, expect 150-250 ng/μl in 45 μl

Restriction digests

  • Digest in a 300 μl final volume
  • Initial DNA is 45 μl from the elution
  • Add 30 μl Buffer 2
  • Add 3 μl BSA
  • Add 212 μl DI water
  • Add 5 μl EcoRI
  • Add 5 μl PstI
  • Add 1 μl DpnI
  • Digest 2 hours at 37°
  • Heat kill 20 minutes at 80°

Binding and removing uncut DNA and short ends to streptavidin-agarose

  • Use Pierce Streptavidin-agarose beads, Pierce 20349 [[1]]
  • These have high capacity, around 75 pmol/μl
  • Dispense 100 μl of the settled beads into a 1.7 ml tube
  • Add 1.5 ml of binding buffer, resuspending the beads
  • Wash for 30 minutes at room temperature with agitation
  • Centrifuge at 8000g for 1 minute
  • Discard the supernatent
  • Add 1.5 ml of binding buffer, resuspending the beads
  • Wash for 30 minutes at room temperature with agitation
  • Centrifuge at 8000g for 1 minute
  • Discard the supernatent
  • Add 300 μl of binding buffer and resuspend the beads
  • Add the cut PCR product (300 μl)
  • Bind for 30 minutes at room temperature with agitation
  • Centrifuge at 8000g for 1 minute in a Bio101 spin filter cartridge
  • Discard the filter
  • Add 1 μl of pellet-paint
  • Add 500 μl of isopropanol and mix
  • Freeze for 30 minutes at -80° to form a gel
  • Centrifuge at 17000g for 30 minutes to precipitate the recovered DNA
  • Wash the DNA pellet with 70% ethanol
  • Resuspend the purified DNA in 50 μl TE
  • Quantitate the DNA

Testing the purified DNA

  • Mix a master ligation mix containing
    • 250 ng of DNA
    • 7.5 μl T4 DNA ligase buffer
    • water to 75 μl
  • Set aside 15 μl as a reference band A
  • Add 1.5 μl T4 DNA ligase
  • Ligate the remaining 60 μl at 16° for 1 hour, heat kill ligase at 80° for 20 minutes
  • Remove 15 μl as ligation sample B
  • Adjust salt concentration by addition of 2.5 μl of 1 M NaCl
    • Add 0.3 μl EcoRI to sample C
    • Add 0.3 μl PstI to sample D
    • Add 0.3 μl EcoRI and 0.3 μl PstI to sample E
  • Ligate 60 minutes at 16°
  • Cut samples C, D, E for 30 minutes at 37° and heat kill for 20 minutes at 80°
  • Run an 0.8% gel
    • Ligated band B should show little single length fragment
    • Ligated and single cut bands C and D should show double length fragments
    • Ligated and double cut band E should show single length fragments

Binding buffer

  • 1 M NaCl
  • 20 mM Tris-HCl pH 7.5
  • 5 mM EDTA pH 8.0
  • 0.1% Tween-20 detergent

Construction Plasmid Biotin Primers

  • Primers amplify any Biobrick plasmid backbone
  • Order 50 nM, 5' biotin modification, HPLC purified
  • GTT TCT TCC TCT AGA AGC GGC CGC GAA TTC,Prefix-RB
  • GT TTC TTC TAC TAG TAG CGG CCG CTG CAG,Suffix-FB
  • Dilute to 30 pmol/μl with TE
  • Optimal annealing temperature seems to be about 62°