Sortostat/Setting up a new chip

this is a work in progress

<need a diagram of the setup here>

Materials

Filter-sterilzed (200nm) ddH20

Moving tubing from an old chip to a fresh one

1. Remove pins 1-8 from the old chip
2. Detach tubes 1-8 from the tubes connected to the manifold (do not remove the tubes from the manifold itself).
   • The advatage of this is that you can now remove the tubing from the incubator and it is much easier to work with.
3. Insert a syringe with a luer adapter into the end tube 1 and fill the tube with water. Use the dripping water to identify the pin #1 and insert it into the appropriate position on the chip.

Contact:Jason Kelly