Smolke:Freezer Defrost Schedule

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Rotating Main -20 C Freezer Defrost Schedule (estimated every 9 months or as needed))
(Rotating Main -20 C Freezer Defrost Schedule (estimated every 9 months or as needed))
(One intermediate revision not shown.)
Line 5: Line 5:
:Leo/Jay - April 2013 - completed
:Leo/Jay - April 2013 - completed
:Remus / Melina - January 2014 - completed
:Remus / Melina - January 2014 - completed
-
:Ryan / Kathy - October 2014
+
:Joy / Yanran - June 2014
-
:Maureen / Yanran - July 2015
+
:Maureen / Kathy - April 2015
-
:Joy / TBD - April 2016
+
:Peter/Ben - December 2015
 +
:Shireen / Michael - August 2016
==Rotating Working -20 C  Enzyme Freezer Defrost Schedule (estimated every 5 months or as needed)==
==Rotating Working -20 C  Enzyme Freezer Defrost Schedule (estimated every 5 months or as needed)==

Revision as of 18:30, 12 June 2014

Home        Contact        Internal        Protocols        Lab Members        Publications        Research       


Contents

Rotating Main -20 C Freezer Defrost Schedule (estimated every 9 months or as needed)

Drew/Stephanie - September 2012 - completed
Leo/Jay - April 2013 - completed
Remus / Melina - January 2014 - completed
Joy / Yanran - June 2014
Maureen / Kathy - April 2015
Peter/Ben - December 2015
Shireen / Michael - August 2016

Rotating Working -20 C Enzyme Freezer Defrost Schedule (estimated every 5 months or as needed)

Yen-Hsiang - April 2013 - completed
Michael - August 2013 - completed
Drew - January 2014
Isis - June 2014
Andy - November 2014
Kate - April 2015



How It Works

Ice builds up in the -20 C freezer and periodically the freezer needs to be completely defrosted so that the condenser unit does not shut down and items can be retrieved efficiently. Keep in mind the rate of ice build up correlates with how long the door is left open as we go into and out of the unit. During a freezer defrost responsibilities include moving all items from the main unit to the smaller units in the laboratory (late afternoon), turning off the unit and leaving the door open to melt out ice build up (overnight), once all the ice has melted turning the unit back on and allowing it to come to temperature (morning-afternoon), returning all items to the unit in their original locations (late afternoon). Note that, organizational items such as metal freezer shelving units should not be moved to the smaller units and can be left out at room temperature during the thaw. Before a freezer defrost all researchers should make an effort to consolidate their items into as few labeled boxes as possible. Any small tubes left out of boxes are likely to be lost during the transfers. During the thawing portion of the defrost it is important that the members in charge of the defrost try to mop up the water from the floor as it collects and place bins in appropriate areas to collect as much of the water as possible.

Scheduling

-20 C main freezer defrost conducted on 9/x by Andrew and Andy.
Personal tools