SBB10Ntbk-MichelNofal

My Project
My Personal Page

Construction Files

sbb02: N15 Protelomerase

sbb02: N15 Protelomerase

PCR MNF11-F/MNF12-R on pBca9523-Bca1455		(945 bp, gp = A) 
PCR MNF13-F/MNF14-R on pBca9523-Bca1485		(1033 bp, gp = B) 
------------- 
PCR MNF11-F/MNF14-R on A + B			(1925 bp, EcoRI/BamHI) 
Sub in pBjk2741-Bca1144 	(EcoRI/BamHI, 910+2170, L) 
Product is pBjk2741-sbb02	{<protel!} 
------------- 
MNF11-F	Forward PCR of Part 1 of sbb02	ccagtGAATTCgtccAGATCTAGCAAGGTAAAAATCGGTGAGTTG
MNF12-R	SOEing of Part1 of sbb02	ggttacgcttttatcttcactgcgTTTTTTAGCTTGCCCTGAGAAATTAACCG
MNF13-F	SOEing of Part2 of sbb02	CGGTTAATTTCTCAGGGCAAGCTAAAAAAcgcagtgaagataaaagcgtaacc
MNF14-R	Reverse PCR of Part 2 of sbb02	gcagtggatccTCAGCTGTAGTACGTTTCCCATGC

JCA Notes

• Have gtcc instead of atg in prefix location
• Need to put part on Clotho
• Otherwise correct
• Internal oligos are longer than necessary, but would work
• Due to similarity to other part, some oligos are being replaced:

Construction of sbb02: N15 Protelomerase

PCR MNF11-F/CA1472 on Bca1455 1-3               (569bp, gp=A)
PCR ca1461/BDBn15001R on Bca1455 1-1		(762bp, gp=B)
PCR BDBn15002F/BDBn15002R on Bca1485 2-1	(1023 bp, gp=C)
--------------------------------------------------------------
PCR BDBn15001F/BDBn15002R on A+B+C		(1924 bp, EcoRI/BamHI)
Sub in pBjk2741-Bca1144				(EcoRI/BamHI, 910+2170, L)
Product is pBjk2741-sbb01	{rbs.part!}

MNF11-F	Forward PCR of Part 1 of sbb02	
ccagtGAATTCatgAGATCTAGCAAGGTAAAAATCGGTGAGTTG
CA1461	GGAAAGGATTGCAGAAAAGAATAACCGCGAATACTTTTAACGCCTATATGA	
PCA assembly of protelomerasefiveprime (Bca1455)
CA1472	TTGTTGGAATAACTTATAAAGATAGTCACGGCGCTCCTTCCAATCATCACT	
PCA assembly of protelomerasefiveprime (Bca1455)
BDBn15001R	Reverse retrieval and SOE-site introduciton on Bca1455
CGCTTTTATCTTCACTGCGTTTTTTAGCTTGCCCTGAG
BDBn15002F	Forward retrieval and SOE-site introduciton on Bca1485
CTCAGGGCAAGCTAAAAAACGCAGTGAAGATAAAAGCG
BDBn15002R	Reverse retrieval and BioBricking on Bca1485
CTGATggatccttaGCTGTAGTACGTTTCCCATGCGG

part:  
GATCTAGCAAGGTAAAAATCGGTGAGTTGATCAACACGCTTGTGAATGAGGTAGAGGCCATTGATGCCTCAGACCGCCCACAAGGCGACAAAACGAAGAGAATTAAAGCCGCAGCCGCACGGTATAAGAACGCGTTATTTAATGATAAAAGAAAGTTCCGTGGGAAAGGATTGCAGAAAAGAATAACCGCGAATACTTTTAACGCCTATATGAGCAGGGCAAGAAAGCGGTTTGATGATAAATTACATCATAGCTTTGATAAAAATATTAATAAATTATCGGAAAAGTATCCTCTTTACAGCGAAGAATTATCTTCATGGCTTTCTATGCCTACGGCTAATATTCGCCAGCACATGTCATCGTTACAATCTAAATTGAAAGAAATAATGCCGCTTGCCGAAGAGTTATCAAATGTAAGAATAGGCTCTAAAGGCAGTGATGCAAAAATAGCAAGACTAATAAAAAAATATCCAGATTGGAGTTTTGCTCTTAGTGATTTAAACAGTGATGATTGGAAGGAGCGCCGTGACTATCTTTATAAGTTATTCCAACAAGGCTCTGCGTTGTTAGAAGAACTACACCAGCTCAAGGTCAACCATGAGGTTCTGTACCATCTCCAGCTAAGCCCTGCGGAGCGTACATCTATACAGCAACGATGGGCCGATGTTCTGCGCGAGAAGAAGCGTAATGTTGTGGTTATTGACTACCCAACATACATGCAGTCTATCTATGATATTTTGAATAATCCTGCGACTTTATTTAGTTTAAACACTCGTTCTGGAATGGCACCTTTGGCCTTTGCTCTGGCTGCGGTATCAGGGCGAAGAATGATTGAGATAATGTTTCAGGGTGAATTTGCCGTTTCAGGAAAGTATACGGTTAATTTCTCAGGGCAAGCTAAAAAACGCAGTGAAGATAAAAGCGTAACCAGAACGATTTATACTTTATGCGAAGCAAAATTATTCGTTGAATTATTAACAGAATTGCGTTCTTGCTCTGCTGCATCTGATTTCGATGAGGTTGTTAAAGGATATGGAAAGGATGATACAAGGTCTGAGAACGGCAGGATAAATGCTATTTTAGCAAAAGCATTTAACCCTTGGGTTAAATCATTTTTCGGCGATGACCGTCGTGTTTATAAAGATAGCCGCGCTATTTACGCTCGCATCGCTTATGAGATGTTCTTCCGCGTCGATCCACGGTGGAAAAACGTCGACGAGGATGTGTTCTTCATGGAGATTCTCGGACACGACGATGAGAACACCCAGCTGCACTATAAGCAGTTCAAGCTGGCCAACTTTTCCAGAACCTGGCGACCGGAAGTTGGGGATGAAAACACCAGGCTGGTGGCTCTCCAGAAACTGGACGATGAAATGCCAGGCTTTGCCAGAGGTGACGCTGGCGTCCGTCTCCATGAAACCGTTAAGCAGCTGGTGGAGCAGGACCCATCAGCAAAAATAACCAACAGCACTCTCCGGGCCTTTAAATTTAGCCCGACGATGATTAGCCGGTACCTGGAGTTTGCCGCTGATGCATTGGGGCAGTTCGTTGGCGAGAACGGGCAGTGGCAGCTCAAGATAGAGACACCTGCAATCGTCCTGCCTGATGAAGAATCCGTTGAGACCATCGACGAACCGGATGATGAGTCCCAAGACGACGAGCTGGATGAAGATGAAATTGAGCTCGACGAGGGTGGCGGCGATGAACCAACCGAAGAGGAAGGGCCAGAAGAACATCAGCCAACTGCTCTAAAACCCGTCTTCAAGCCTGCAAAAAATAACGGGGACGGAACGTACAAGATAGAGTTTGAATACGATGGAAAGCATTATGCCTGGTCCGGCCCCGCCGATAGCCCTATGGCCGCAATGCGATCCGCATGGGAAACGTACTACAGCTAAG

sbb06: piggieBac 3'TR

sbb06: piggieBac 3'TR

Pool MNF001 through MNF008, assemble by PCA 	
PCR MNF01/MNF10 on PCA reaction		(267 bp, EcoRI/BamHI)
Sub in pBjk2741-Bca1144	(EcoRI/BamHI, 910+2170, L)
Product is pBjk2741-sbb06 {<piggieBac-3'TR>}
-------------
MNF01	PCA Assembly of sbb06	CCAGTGAATTCGTCCAGATCTTTTGTTACTTTATAGAAGAAATT
MNF02	PCA Assembly of sbb06	TTATTAAAAAAAAACAAAAACTCAAAATTTCTTCTATAAAGTAA
MNF03	PCA Assembly of sbb06	TTTTGTTTTTTTTTAATAAATAAATAAACATAAATAAATTGTTTG
MNF04	PCA Assembly of sbb06	CACTTACATACTAATAATAAATTCAACAAACAATTTATTTATGTT
MNF05	PCA Assembly of sbb06	TATTATTAGTATGTAAGTGTAAATATAATAAAACTTAATATCTAT
MNF06	PCA Assembly of sbb06	ATATCGAGGTTTATTTATTAATTTGAATAGATATTAAGTTTTATT
MNF07	PCA Assembly of sbb06	AATAAATAAACCTCGATATACAGACCGATAAAACACATGCGTCAA
MNF08	PCA Assembly of sbb06	TACGTTAAAGATAATCATGCGTAAAATTGACGCATGTGTTTTATC
MNF09	PCA Assembly of sbb06	CATGATTATCTTTAACGTACGTCACAATATGATTATCTTTCTAGG
MNF10	PCA Assembly of sbb06	GCAGTGGATCCTTAACCCTAGAAAGATAATCATAT

JCA Notes

• Correct except for prefix sequence should be atg

sbb06: piggieBac 3'TR

Pool MNF001 through MNF008, assemble by PCA 	
PCR MNF01/MNF10 on PCA reaction		(267 bp, EcoRI/BamHI)
Sub in pBjk2741-Bca1144	(EcoRI/BamHI, 910+2170, L)
Product is pBjk2741-sbb06 {<piggieBac-3'TR>}
-------------
MNF01	PCA Assembly of sbb06	CCAGTGAATTCatgAGATCTTTTGTTACTTTATAGAAGAAATT
MNF02	PCA Assembly of sbb06	TTATTAAAAAAAAACAAAAACTCAAAATTTCTTCTATAAAGTAA
MNF03	PCA Assembly of sbb06	TTTTGTTTTTTTTTAATAAATAAATAAACATAAATAAATTGTTTG
MNF04	PCA Assembly of sbb06	CACTTACATACTAATAATAAATTCAACAAACAATTTATTTATGTT
MNF05	PCA Assembly of sbb06	TATTATTAGTATGTAAGTGTAAATATAATAAAACTTAATATCTAT
MNF06	PCA Assembly of sbb06	ATATCGAGGTTTATTTATTAATTTGAATAGATATTAAGTTTTATT
MNF07	PCA Assembly of sbb06	AATAAATAAACCTCGATATACAGACCGATAAAACACATGCGTCAA
MNF08	PCA Assembly of sbb06	TACGTTAAAGATAATCATGCGTAAAATTGACGCATGTGTTTTATC
MNF09	PCA Assembly of sbb06	CATGATTATCTTTAACGTACGTCACAATATGATTATCTTTCTAGG
MNF10	PCA Assembly of sbb06	GCAGTGGATCCTTAACCCTAGAAAGATAATCATAT

Part Assembly (Wet Lab)

2/17/2010

sbb02

Note: I'll be sharing oligos with Ben for this part.

• Oligo samples were diluted to 100uM in the tubes they came in, then diluted again to 10uM in separate tubes to be used in the experiment.
• Three PCR reactions were prepared (water added first, protein last) in separate tubes (as described in Cloning by PCR) with these oligos/templates:

1. MNF11-F/CA1472 on Bca1455 1-3 (Tube labeled A)
2. ca1461/BDBn15001R on Bca1455 1-1 (B)
3. BDBn15002F/BDBn15002R on Bca1455 1-2 (C)

24uL ddH2O
3.3uL 10x Expand Buffer "2"
3.3uL dNTPs (2mM in each)
1uL Oligo 1, 10uM
1uL Oligo 2, 10uM
0.5uL Expand polymerase "1"
0.5uL Template DNA

• The predicted products for all three are below 2000kb, so the reaction mixtures should be PCRed up using the 2k55 temperature program.
• The GSIs get to do the actual PCRing.. (aka putting the tubes in the thermocycler and choosing the program, pressing the button, and waiting.)

sbb06

• Completed initial assembly step (as described in PCA Gene Synthesis) in the construction of sbb06 by PCA.

OK, so you've got a bunch of oligos, now what? First, use this recipe and program to do initial assembly of the oligos (do a separate one of these reactions for each chunk you're assembling):
Recipe

   1. 38 uL ddH2O
   2. 5 ul 10x expand buffer
   3. 5 ul 2mM dNTPs
   4. 1 ul oligo mixture (100uM total, mixture of oligos after combination of 100uM stocks)
   5. 0.75 ul Expand polymerase 

Program (can run JCA/PCA1)

   1. 2 min initial denature at 94oC
   2. 30 sec denature at 94oC
   3. 30 sec anneal at 55oC [This should be the overlap temp of your oligos - vary as needed]
   4. 30 sec extension at 72oC
   5. repeat 2-4 30 times total 

• Again, the GSIs ran the program.

2/22/2010

sbb02

• PCR tubes were retrieved (A, B, and C) after the reactions were completed by the GSIs.
• All three samples were prepared for a preparative gel.
  • 6uL PCR product + 4uL loading buffer
• The gel with my samples was run by JHL.

• My PCR products (lanes 10, 11 ,12) appear to be the correct sizes.
• I mistakenly left lab early, and when I came back at 4:30pm, Will and Chris told me that they had already cut the bands out for me and melted them in 650uL ADB buffer (as specified in SOEing PCR).

sbb06

• Small-frag Zymo Cleanup was performed to purify PCA Assembly.

The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction for fragments smaller than 300bp. It also will remove the buffer and restriction enzymes from a restriction digest reaction.

   1. Add 100 uL of Zymo ADB buffer (brown bottle) to the reaction.
   2. Transfer into the Zymo column (small clear guys)
   3. Add 500uL of Ethanol and pipette up and down to mix
   4. spin through, discard waste.
   5. Add 200 uL of PE or Zymo Wash buffer (which is basically 70% ethanol)
   6. spin through, discard waste.
   7. Add 200 uL of PE or Zymo Wash buffer
   8. spin through, discard waste.
   9. spin for 90 seconds, full speed to dry.
  10. elute with water into a fresh Eppendorf tube

• The reaction mixture for amplification of the assembled fragments was prepared.

Now, you need to do an amplification of the correct full-length chunks. Clean up the assembly reaction with a zymo column; don't bother running it on a gel - it'll be a smeary mess and won't really help you. Save the purified product in case this step fails! For the amplification reaction, do a normal phusion program with 1 ul of the cleaned up assembly reaction as template, and using the outermost oligos for the chunk. That is:
Recipe

   1. 1 ul each outer oligo (10 uM)
   2. .5 ul phusion
   3. 10 ul 5x phusion buffer
   4. 5 ul 2mM dNTPs
   5. 32.5 ul H2O 

Program

   1. 2 min initial denature at 94oC
   2. 30 sec denature at 94oC
   3. 30 sec anneal at 60oC [This should be high, as your outer oligos now have a huge overlap with the correct product]
   4. 30 sec extension at 68oC
   5. repeat 2-4 30 times total 

• The program was done by the GSIs.

2/24/2010

sbb02

• PCR product mixture (A+B+C) was purified by Zymo Gel Purification and eluted in 50uL ddH2O:

All spins until the drying step are 15 second full speed spins. 

   1. cut out bands minimizing extra gel matter.
   2. put in ependorf tube and add 600uL of Zymo ADB buffer (brown bottle).
   3. heat at 55, shake and/or vortex until the gel has dissolved.
   4. If the DNA is <300bp add 250uL of isopropanol
   5. transfer into the Zymo column inside a collection tube (small clear guys)
   6. spin through, discard waste.
   7. Add 200 uL of PE buffer (which is basically 70% ethanol)
   8. spin through, discard waste.
   9. Add 200 uL of PE buffer
  10. spin through, discard waste.
  11. spin for 90 seconds, full speed to dry.
  12. elute with 8.5 uL of water into a fresh Eppendorf tube 

• Second PCR step was set up ( Cloning by PCR):

24uL ddH2O
3.3uL 10x Expand Buffer "2"
3.3uL dNTPs (2mM in each)
1uL Oligo 1, 10uM
1uL Oligo 2, 10uM
0.5uL Expand polymerase "1"
0.5uL Template DNA

• 2K55 program was used again.

sbb06

• Amplification product was retrieved and prepared for an analytical gel.
  • 3uL PCR product + 7uL loading buffer
• I ran this gel.

• My amplification product was supposed to be in lane 5. The amplification does not seem to have worked. I'll re-assemble next time..