Mesoplama florum:Culture media
ATCC 1161 Medium
Mix a base broth in a 1 liter 45mm cap bottle the following chemicals:
|Heart Infusion Broth (Difco 0038)||17.5 g|
|Agar Noble (Difco 0142) if necessary||12 g|
|DI Water||710 ml|
Autoclave at 121C for 20 minutes and cool to room temperture (broth) or 55C (Agar) on a 55C water bath.
While autoclaving, thaw 200 ml of Sigma H-1139 heat inactivated horse serum. If preparing agar, warm the horse serum to 45C (55C will precipitate protein). Also warm 100 ml of Gibco 18180-059 autolyzed yeast extract 55C without shaking.
Add the sterile horse serum and yeast extract to the autoclaved medium. Avoid the yeast extract precipitate if possible.
Assemble a 150 ml bottle top 0.22μ filter on the 1 liter bottle, or use a 0.22μ syringe filter. For agar, it is helpful to put the bottle on a foam insulating pad to delay cooling. Add by vacuum filtration:
|Penicillin G 200,000 U/ml||1 ml|
|2% phenol red 2 ml or 1% cresol red||5 ml|
Mix gently by rolling the bottle to minimize bubble formation. Agar can be placed back in the 55C water bath to allow the bubbles to subside. Poured plates can be swirled to move bubbles to the side of the plate.
Adjust pH to 7.4 with 1 M HCl or 1 M NaOH. Measured pH of as-made broth is 7.46, probably close enough. For cresol red containing solution, adjust pH to 7.8
When preparing a phenol red 2% solution it must be neutralized with sufficient NaOH to convert it to the sodium salt. The phenol or cresol red amount can be adjusted to control the depth of color to taste.
SP-4 (ATCC 988) Medium
Mix a base broth containing:
|Mycoplasma broth base (BBL 111458)||3.5 g|
|DI water||615 ml|
Adjust pH to 7.5 and autoclave at 121C for 20 minutes.
Centrifuge 2 x 17.5 ml of liquid yeast extract (Gibco 18180-059) at high speed to remove sediment.
Mix 2 g of Yeastolate (Difco 5577) in 100 ml DI water.
Sterile filter into the cooled medium:
|penicillin G 500,000 U/ml||400 μl|
|2% phenol red||2 ml|
|2% Yeastolate (Difco 5577)||100 ml|
|Newborn calf serum||170 ml|
|liquid yeast extract||35 ml|
|10x CMRL-1066 solution||50 ml|