Lidstrom: Agarose Gel Electrophoresis

Return to Protocols

• handy link: gel electrophoresis
  • click the gel electrophoresis button on the left

Starting with an empty box

• Fill with TBE until it covers the gel holding tray.
• Add 40 uL of ethidium bromide if your gels don't already have it mixed into the liquefied agarose.
  • If your buffer already has some ethidium bromide but it needs more, 20 uL is probably good.
• Load sample
  • 1.7 uL of a PCR product is usually plenty
• Load ladder
  • If using MassRuler, 4 uL is good for skinny lanes.
• Run @ 110 V for 20 min and check the gel.
  • 40 min is pretty safe for 0.7 - 1% agarose gels

Imaging

• Exposures should be < 0.5 seconds to minimize background emissions. If you need longer, you probably should have had more ethidium bromide.

Tips

• If you have a voltage source that will stop after a set amount of time, feel free to run your gel as you leave and image it in the morning. Diffusion of bands shouldn't be a big problem unless they are << 500 bp.
  • Don't do this if you are going to cut & gel purify the band.

gel sat 16 hours between photos

• You don't need much DNA. 50 ng should be plenty.

75 and 150 ng DNA on a 0.7% agarose gel