Design a Microfluidic Chip

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
Current revision (21:57, 28 October 2010) (view source)
 
(4 intermediate revisions not shown.)
Line 1: Line 1:
-
The process of designing a microfluidic chip to be ordered from the [http://thebigone.caltech.edu/foundry/ Caltech Foundry ] is not hard but it is a little involved.
+
The process of designing a microfluidic chip to be ordered from the [http://kni.caltech.edu/foundry/ Caltech Foundry ] is not hard but it is a little involved.
==Steps==
==Steps==
Line 12: Line 12:
-
[[Category:Microfluidic Protocol]]
+
[[Category:Protocol]] [[Category:Microfluidics]]

Current revision

The process of designing a microfluidic chip to be ordered from the Caltech Foundry is not hard but it is a little involved.

Steps

  1. Learn the design rules
  2. Make a rough outline of your chip design
    • This should be influenced by previous designs as well as constraints of the design rules
  3. gain a (rudimentary) understanding of AutoCAD
  4. Create a schematic of your chip in autoCAD

Design Rules for Microfluidics

Personal tools