Quorum sensing is a system used by bacteria to detect population density and respond. This communication is carried out by molecular signals produced and released by the bacteria. The signals disperse to nearby individuals and eventually lead to a pathway that causes induction of more signal production in those neighbors, in addition to other desired genes. The more dense the population, the higher concentration the signal is. This circuit creates a positive feedback loop that causes the population to work in sync. In nature, bacteria can use quorum sensing for functions such as bioluminescence, virulence, and biofilm formation. Because quorum sensing is such an important aspect of biofilm formation, it is a valuable topic of research for disease prevention and treatment. In addition, QS has various applications in synthetic biology since QS systems can be engineered to accomplish useful tasks.
Quorum Sensing in Gram Negative Bacteria
V. fischeri is a classic example of gram negative bacterial quorum sensing. The system uses two regulator proteins that have homologs in other QS systems, LuxI and LuxR. LuxI is a protein that synthesizes the signal, N-(3-oxohexanoyl)-homoserinelactone (HSL), called the autoinducer. The autoinducer then diffuses out of the original sender and into neighboring cells. If V. fischeri density is low, there is a low HSL concentration. Similarly, at high densities, there is high HSL concentration. At a particular threshold concentration, HSL will bind to and activate LuxR, a protein which activates transcription of a set of genes that include bioluminescence and luxI. luxI transcription also leads to further production of LuxI, creating a positive feedback loop that creates rapid light generation. The light generated by V. fischeri is then used by symbiotic fish for purposes such as hunting or counterillumination. However, since LuxR negatively regulates luxR, light production is eventually stopped.
P. aeruginosa uses a system similar to LuxI/LuxR. lasI encodes LasI, which catalyzes formation of a HSL autoinducer(3-oxo-C12-HSL). 3-oxo-C12-HSL binds to LasR, which regulates a set of genes that include a second QS system, RhlI and RhlR. Because RhlI and RhlR production results from LasR stimulation, it is thought that the two systems are sequential. In addition, 2-heptyl-3-hydroxy-4-quinolone (PQS) is thought to connect the two systems. Both Las and Rhl system regulate various virulence genes important for infection.
Quorum Sensing in Gram Positive Bacteria
Gram positive quorum sensing systems differ from gram negative systems in their autoinducer molecules and how signals are received. Instead of HSL based signals, a peptide is used (called an autoinducing peptide, AIP). These signals cannot diffuse freely into and out of cells like HSL can and are instead transported through ATP-binding protein exporters. In addition, the signal does not directly bind to a transcriptional activator. Instead, it binds to a receptor on the surface of the receiver’s membrane that uses a phosphorylation based relay system to eventually regulate gene expression. Quorum sensing in Streptococcus pneumonia is typical of gram positive bacteria. comAB encodes for AIP export genes, comC encodes for the AIP, comD encodes for response receptor, and comE encodes for the transcriptional regulator.
Multiple Systems and Cross-Talk
Many bacteria have multiple QS systems, as seen with P. aeruginosa. Although autoinducer are usually specific to their receptor, there is sometimes nonspecific signaling or cross-talk between these systems. For example, there is interaction in cystic fibrosis patients between P. aeruginosa and Burkholderia cepacia. B. cepacia can recognize the HSL signals produced by P. aeruginosa to activate its cep QS system, but P. aeruginosa cannot recognize any of B. cepacia’s signals. This is important for understanding cystic fibrosis development since B. cepacia colonizes only after P. aeruginosa is already established. This suggests that quorum sensing is vital for the development of multispecies communities. Multispecies communication can also be specific. luxS, used to synthesize autoinducer-2 (AI-2), has been found in over 55 species of bacteria and has been found to regulate biofilm development.
Quorum-Sensing Circuit Architecture
Multiple QS systems can be arranged to perform interesting functions. As seen with P. aeruginosa, the Las and Rhl systems are temporally related. Another example is in Vibrio harveyi, in which 3 different signals are used to optimally allow the bacteria to respond depending on the environment. The 3 pathways initially function in parallel, but eventually converge to activate the same result, luminescence. Each of the three pathways is controlled by a separate autoinducer (HAI-1, AI-2, and CAI-1) and the activation of any of the three eventually leads to the activation of a common protein, LuxO. Thus, this parallel system functions as an OR logic gate.
Application to Synthetic Biology: Biopixels
While quorum sensing is a robust system in the highly variable cellular environment, it is limited by the rate of diffusion and thus is a slow process that constrains the physical size of the system. Communication can also be achieved through gas phase signals, which are relatively faster than diffusion through liquid media, but also are weaker and short lived. Prindle et al. have combined these two signaling methods in order to create "biopixels", a large scale, yet robust quorum sensing system.
Since quorum sensing is effective on a small scale, they used a LuxI/AiiA system to produce the autoinducer acyl-homoserine lactone for intracolony communication. These colonies are then linked together by H2O2 gas communication through the addition of NADH dehydrogenase II (ndh), which produces H2O2, under the control of a lux promoter. H2O2 signal is received by a native control system that deactivates ArcAB, which is a repressor for lux. They were able to generate synchronization over a distance of 5mm, or 2.5 million cells.
They added an additional copy of LuxI under the control of an arsenite-responsive promoter that is repressed in the absence of arsenite. When there is no arsenite, the system generates baseline oscillations. With arsenite, the additional LuxI promoter becomes active and increases the amplitude and period of oscillation. They found this system to be very sensitive and able to reliably sense concentrations of arsenite as low as 0.2 μM (WHO recommends 0.5 μM for developing nations).
They also created an alternate system where luxR was completely removed except from a single arsenite sensitive promoter. This "threshold" system produced no oscillations until an adequate amount of arsenic (minimum 0.25 μM) was added.
A Bacteria Edge Detector
Tabor et al. have created an edge detector in E. coli in order to demonstrate the ability the create predictable genetic circuits. Each bacterial cell acts as an independent processor that determines if they are on the "edge" or not using the following logic:
IF (NOT light) produce signal IF (signal AND (NOT (NOT light))) produce pigment
In the dark, the E. coli will only produce signal. In the light, they will not be able to produce signal but can accept it to form pigment. To make a fully functioning edge detector, they needed three things: 1. a darkness detector, 2. an intracellular communication, and 3. X AND (NOT Y) logic.
Their darkness detector was created by rewiring the pathway leading to chromophore phycocyanobilin (PCB). An osmosensing domain in the protein kinase EnvZ was replaced with a photoreceptor domain. This caused repression of phosphorylation in the presence of red light.
Quorum sensing was employed for communication between cells. The QS system from V. fischeri was reprogrammed by placing the production of LuxI under the control of the darkness sensor. LuxR was also altered to produce β-galactosidase.
To create the X AND (NOT Y) logic function, a two-input promoter was created with the aid of a genetic inverter. The genetic inverter inverts the activity of an input promoter and was created from the cI gene of phage λ. Thus, the promoter is activated by AHL (the autoinducer) bound LuxR, but is repressed by CI.
iGEM Connection: MercuroColi
This team was able to create a test strip that can quantify the concentration of mercury. The test strip has bacteria and an IPTG gradient on it. When a sample of water is placed on the strip, the bacteria on them will either become "senders" or "receivers". When there is more mercury than IPTG, the senders release a signal that induces expression of red dye in nearby receivers. This creates a small red line on the strip corresponding to mercury concentration.
- Waters CM and Bassler BL. . pmid:16212498.
- Engebrecht J, Nealson K, and Silverman M. . pmid:6831560.
- Juhas M, Eberl L, and Tümmler B. . pmid:15816912.
- Lee J, Jayaraman A, and Wood TK. . pmid:17511876.
- Fuqua C, Winans SC, and Greenberg EP. . pmid:8905097.
- Haddock SH, Moline MA, and Case JF. . pmid:21141672.
- Duan K, Surette MG. 2007. Environmental regulation of Pseudomonas aeruginosa PAO1 Las and Rhl quorum-sensing systems. J. Bacteriol. 189:4287–36
- Pearson JP, Gray KM, Passador L, Tucker KD, Eberhard A, et al. 1994. Structure of the autoinducer required for expression of Pseudomonas aeruginosa virulence genes. Proc. Natl. Acad. Sci. USA 91:197–201
- Pesci EC, Pearson JP, Seed PC, Iglewski BH. 1997. Regulation of las and rhl quorum sensing in Pseudomonas aeruginosa. J. Bacteriol. 179:3127–32
- McKnight SL, Iglewski BH, and Pesci EC. . pmid:10781536.
- Kleerebezem M, Quadri LE, Kuipers OP, and de Vos WM. . pmid:9219998.
- Riedel K, Hentzer M, Geisenberger O, Huber B, Steidle A, Wu H, Høiby N, Givskov M, Molin S, and Eberl L. . pmid:11739757.
- De Keersmaecker SC, Sonck K, and Vanderleyden J. . pmid:16459080.
- Henke JM, Bassler BL. 2004. Three parallel quorum-sensing systems regulate gene expression in Vibrio harveyi. J. Bacteriol. 186:6902–14
- Prindle, A., P. Samayoa, I. Razinkov, T. Danino, L. S. Tsimring and J. Hasty (2012). "A sensing array of radically coupled genetic /`biopixels/'." Nature 481(7379): 39-44.