BioMicroCenter:Tecan Freedom Evo

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(TUBE LIST)
Line 1: Line 1:
{{BioMicroCenter}}
{{BioMicroCenter}}
 +
 +
  ** All users must be trained before being allowed to use the Evo **
 +
==TECAN FREEDOM EVO 150==
==TECAN FREEDOM EVO 150==
[[Image:Tn_PR004749.jpg|right|97px]]
[[Image:Tn_PR004749.jpg|right|97px]]
-
The TECAN Freedom EVO 150 is a highly versatile device capable of automating dozens of different applications. Our Tecan is currently equipped with a four-channel liquid handling arm and a 96 tip multi-channel arm. The instrument supports a wide variety of fluid transfer operations for both 96 and 384-well microplates including reagent addition, continuous reagent dispensing, sample transfer, plate replication, plate-to-plate transfer (96 to 96, 384 to 384, 96 to 384) serial dilutions, and within-well mixing. The Tecan Freedom Evo 150 can accurately handle volumes between 1 and 200 ul.
 
-
== LOCATION and TRAINING==
+
The Tecan Freedom EVO 150 is a highly-versatile device equipped with a four-channel liquid handling arm and a 96-channel pipette arm. The instrument supports a wide variety of fluid transfer operations for all sizes of microplates as well as 150mm dishes and can perform operations including reagent addition, continuous reagent dispensing, sample transfer, plate replication, plate-to-plate transfer, serial dilutions, and within-well mixing.  The EVO can accurately handle volumes between 1 and 500 µl and has the ability to perform virtually any routine liquid transfer, replacing manual pipetting.  The Freedom EVO is user-friendly and runs the EVOware software package. The EVOware package allows for the creation of a virtual image of the platform (right) and allows the scientist to easily implement methods with a drag-and-drop graphical user interface.  
-
The TECAN Freedom EVO 150 is currently located in [[BioMicroCenter:MAP|68-4XX]]. The TECAN will be relocated to the BioMicro Center in early 2009. Because of the flexibility of the EVO system, all users are required to be trained prior to using the robot. Training can be scheduled in the BioMicro Center with [[BioMicroCenter:People|Stuart Levine]].
+
-
== CONSUMABLES ==
+
Currently, The BioMicro Center offers very limited access to the EVO while we learn how to use to robot. If you are interested in being involved in the early use of the robot and being an active participant in the learning process, please contact [[BioMicroCenter:People|Stuart Levine]]
-
The BioMicro Center is currently evaluating all of the different plastics to be used in the EVO. This is very important because a significant set up is required for handling each different type of tube, tip or plate, each of which must be configured separately.. Failure to use "approved" plastics can cause expensive damage to the machine and significant down time disrupting many experiments. BMC approved plastics will be available in the BioMicro Center at cost.
+
-
Please enter the types of plastics you would like to use along with their catalog number and supplier.
+
== SOFTWARE ==
-
=== TIP LIST ===
+
The Tecan EVO currently runs using the [http://www.tecan.com/platform/apps/product/index.asp?MenuID=1458&ID=1084&Menu=1&Item=21.7.1 EVOware] software package. EVOware can be run in either of two modes: directly connected to the Tecan EVO to allow control of the robot, or on your desktop computer in a simulation mode. Simulation mode is extremely useful in that it allows the user to pre-design the steps in their program. All users must download EVOware and design their protocols to be brought to the EVO.
-
VWR brand 1-200 ul tips VWR 30128-378
+
-
VWR brand 1-10 ul tips VWR 53503-810
+
[[BioMicroCenter:EVOware | Obtain a copy of EVOware]]
-
=== PLATE LIST ===
+
** Currently all programs must be approved by [[BioMicroCenter:People|Stuart Levine]], Wendy Gilbert or Joel Greenwood before being loaded onto the TECAN **
-
Pierce/Thermo 96 well plate black, U-bottom VWR 62403-152
+
-
=== TUBE LIST ===
+
== LABWARE ==
-
Axygen 1.7ml microcentrifuge tube VWR 10011-722
+
Labware refers to the plastic consumables used by the robot. These include the tips, tubes, plates, etc. Each piece of labware must be individually prepared for the EVO and each program must refer to specific pieces of labware. Failure to properly set up labware can cause expensive damage to the machine and significant down time. The BioMicro Center will stock a standard set of labware that will be included in the "Base.xsd" file.  
-
== SOFTWARE ==
+
[[BioMicroCenter:EVOlabware | LIST OF LABWARE]] - We are currently evaluating different types of labware. If you are interested in having a particular piece of labware, please make sure to edit the list.
-
The Tecan EVO is controlled by EVOWARE STANDARD. The software itself is free and can be downloaded onto any PC. When not connected to the robot, EVOWARE runs in a simulation mode. This mode can be used to design all of your routines for the robot which can later be exported to the main robot. An image of the EVOWARE software will be placed online soon for download. In the mean time, the CDs are available by contacting [[BioMicroCenter:People|Stephen Goldman]].
+
-
==SCHEDULING==
+
== HARDWARE ==
 +
* 4 channel liquid handling arm (LiHa)
 +
* 96 channel multichannel arm (MCA)
 +
* 2 thermal control plate racks (4C - ??C)
 +
* 2 ambient plate racks
 +
 
 +
== LOGISTICS ==
 +
 
 +
=== LOCATION ===
 +
The TECAN Freedom EVO 150 is currently located in [[BioMicroCenter:MAP|68-4XX]]. The TECAN will be relocated to the BioMicro Center in early 2009. Because of the flexibility of the EVO system, all users are required to be trained prior to using the robot. Training can be scheduled in the BioMicro Center with [[BioMicroCenter:People|Stuart Levine]].
 +
 
 +
=== SCHEDULING ===
Access to the Tecan is available in 2 hour blocks. You can schedule use of the Tecan [[BioMicroCenter:Tecan_CAL|HERE]]
Access to the Tecan is available in 2 hour blocks. You can schedule use of the Tecan [[BioMicroCenter:Tecan_CAL|HERE]]
'''NOTE: Until March 2009, access to the Tecan will be restricted. Please make sure to contact [[BioMicroCenter:People|Stuart Levine]] after you have scheduled time to be sure the room will be open'''
'''NOTE: Until March 2009, access to the Tecan will be restricted. Please make sure to contact [[BioMicroCenter:People|Stuart Levine]] after you have scheduled time to be sure the room will be open'''
-
==[[BioMicroCenter:Pricing|COST]]==
+
=== [[BioMicroCenter:Pricing|COST]] ===
-
In order to defray the costs of the annual service contract, each session on the EVO will be charged '''$75.'''. Tips and 96 well plates can be purchased from the BioMicro center or obtained from your own lab. Additionally, training is required for all new users. A training session will be $100
+
In order to defray the costs of the annual service contract, each session on the EVO will be charged '''$75.'''. Tips and 96 well plates will be available for purchase from the BioMicro center or obtained from your own lab. Additionally, training is required for all new users. A training session will be $100
-
 
+
-
  ** All users must be trained before being allowed to use the Evo **
+

Revision as of 20:56, 3 March 2009

Image:BioMicroCenter-header6.jpg

 ** All users must be trained before being allowed to use the Evo **

Contents

TECAN FREEDOM EVO 150

The Tecan Freedom EVO 150 is a highly-versatile device equipped with a four-channel liquid handling arm and a 96-channel pipette arm. The instrument supports a wide variety of fluid transfer operations for all sizes of microplates as well as 150mm dishes and can perform operations including reagent addition, continuous reagent dispensing, sample transfer, plate replication, plate-to-plate transfer, serial dilutions, and within-well mixing. The EVO can accurately handle volumes between 1 and 500 µl and has the ability to perform virtually any routine liquid transfer, replacing manual pipetting. The Freedom EVO is user-friendly and runs the EVOware software package. The EVOware package allows for the creation of a virtual image of the platform (right) and allows the scientist to easily implement methods with a drag-and-drop graphical user interface.

Currently, The BioMicro Center offers very limited access to the EVO while we learn how to use to robot. If you are interested in being involved in the early use of the robot and being an active participant in the learning process, please contact Stuart Levine

SOFTWARE

The Tecan EVO currently runs using the EVOware software package. EVOware can be run in either of two modes: directly connected to the Tecan EVO to allow control of the robot, or on your desktop computer in a simulation mode. Simulation mode is extremely useful in that it allows the user to pre-design the steps in their program. All users must download EVOware and design their protocols to be brought to the EVO.

Obtain a copy of EVOware

** Currently all programs must be approved by Stuart Levine, Wendy Gilbert or Joel Greenwood before being loaded onto the TECAN ** 

LABWARE

Labware refers to the plastic consumables used by the robot. These include the tips, tubes, plates, etc. Each piece of labware must be individually prepared for the EVO and each program must refer to specific pieces of labware. Failure to properly set up labware can cause expensive damage to the machine and significant down time. The BioMicro Center will stock a standard set of labware that will be included in the "Base.xsd" file.

LIST OF LABWARE - We are currently evaluating different types of labware. If you are interested in having a particular piece of labware, please make sure to edit the list.

HARDWARE

  • 4 channel liquid handling arm (LiHa)
  • 96 channel multichannel arm (MCA)
  • 2 thermal control plate racks (4C - ??C)
  • 2 ambient plate racks

LOGISTICS

LOCATION

The TECAN Freedom EVO 150 is currently located in 68-4XX. The TECAN will be relocated to the BioMicro Center in early 2009. Because of the flexibility of the EVO system, all users are required to be trained prior to using the robot. Training can be scheduled in the BioMicro Center with Stuart Levine.

SCHEDULING

Access to the Tecan is available in 2 hour blocks. You can schedule use of the Tecan HERE

NOTE: Until March 2009, access to the Tecan will be restricted. Please make sure to contact Stuart Levine after you have scheduled time to be sure the room will be open

COST

In order to defray the costs of the annual service contract, each session on the EVO will be charged $75.. Tips and 96 well plates will be available for purchase from the BioMicro center or obtained from your own lab. Additionally, training is required for all new users. A training session will be $100

Personal tools