Explore an engineered biological system through a computer simulation, an electronics building kit, and a real-life example.
Acknowledgments: This lab was developed with MIT's undergraduate lab subject 20.109, in collaboration with extraordinary biological engineers: Jeff Tabor, Deepak Chandran, Reshma Shetty, Steve Wasserman, & Kelly Drinkwater
Objectives
NEED TO REWRITE THESE / REWRITE DISCUSSION QUESTIONS TO MATCH -- in particular the first one
By the conclusion of this laboratory investigation, the student will be able to:
Explain how synthetic biology as an engineering discipline differs from genetic engineering.
Define and properly use synthetic biology terms: system, gain, tuning
Define and properly use molecular genetics terms: two component system, transcriptional activation, phosphorylation
Relate the bacterial photography system to the two component signaling system.
Model a biological system using electronic parts and a computer program.
Explain the role that modeling can play in design, and name some ways that models differ from reality.
Introduction
Part I: TinkerCell
Computer-aided design (CAD) is a hallmark of several mature engineering disciplines, like mechanical engineering or civil engineering. These engineers can rely on computer simulations to reliably predict the behavior of a car or a bridge, rather than run a hundred cars into walls to see how they perform. Biological engineers have fewer good CAD tools at their disposal. More often, they must run laboratory experiments to test a system. But wouldn't it be nice (and quicker and less expensive too!) to try a few things on a computer first? And then, with some good candidate designs in hand, we could turn to the bench with more confidence, having eliminated the clear failures.
One early effort at a CAD tool for synthetic biology is TinkerCell, developed by engineers at the University of Washington. TinkerCell allows you to visually construct and then simulate/analyze a biological network. Using the following instructions, you can use TinkerCell to build the bacterial photography system (or at least a simplified model of it). For those who would like to read more about the TinkerCell CAD tool, you can find the details in this article from the Journal of Biological Engineering.
Getting Started with TinkerCell
TinkerCell can be downloaded for free from this page. Make sure you download the "current" version, not the "stable" version. The instructions in this tutorial were written for the Mac-based version of the program. If you are running TinkerCell on Windows or Linux, you may see some subtle differences.
After you open the TinkerCell application, begin familiarizing yourself with the basic operation of the program. In particular, try to use
the Molecules and Reaction tabs: try to select 2 molecules from the molecules that are available. For example, click the "Enzyme" on the icon strip and then click the network canvas to place an enzyme. Repeat with a second molecule, selecting "Transcription Factor" from the icon strip and placing it on the network canvas. Next, choose the Reaction tab and select either activation or repression. Click on the enzyme first, then the transcription factor. If you chose activation, you'll be asked to choose between two mechanisms. A reaction arrow should appear. Next, if you like, try stamping out two receptor molecules and connect them with a different kind of regulation, or try making an enzyme catalyze a reaction with one or more small molecules.
the Parts and Regulation tabs: Choose the Parts tab and try stamping out a gene expression cassette, i.e. an operator (activator or repressor binding site), a promoter, an RBS, a protein coding sequence, and a terminator (optional). The parts do not need to be aligned when you place them on the network canvas, but if you drag them next to one another they should connect. You can then choose "Transcription Regulation" from the Regulation tab, and link the transcription factor you placed earlier to the gene's operator. A reaction arrow should appear. You can move the icons on the canvas, reshape the reaction arrows, and relabel the parts to your liking. Try using "Protein Production" from the Reaction tab to make the coding region of the gene produce a protein.
Building the bacterial photography system
Fully built bacterial photography system
Now that you have the basic mechanics in hand, you can build the bacterial photography system. Follow the steps below, or use the additional tutorial linked here.Do not actually use the additional tutorial, it is not updated
Start this project on a new canvas. Select "New Canvas" from the File Menu, or click the new page icon on the top toolbar.
Assemble the reporter gene: From the "Parts" tab, place an "Activator Binding Site", "Promoter," "RBS," and "Coding" icon on your canvas. Drag the parts next to each other, in that order, so they snap together.
Name the reporter gene elements: Click on the name below each part to rename it. The promoter should be named "PompC." The RBS can be left as is. The coding sequence can be renamed "LacZ".
Add the transcription factor: From the "Molecules" tab, select "Transcription Factor" and place one on the canvas. It will represent the phosphorylated form of OmpR, so rename it "OmpRp".
Visual appeal: Select the OmpRp protein, and then from the "Edit" menu choose "Add decorator." A dialog box will display a choice of icons. From the "Decorators" tab, select "phosphorylation".
Regulating transcription
Activate Transcription of PompC with OmpRp: From the "Regulation" tab, choose "Transcriptional Activation" and then click on OmpRp and the activator binding site just before PompC. Choose “Transcription Activation” from the pop-up menu.
Add the Cph8 light receptor: From the "Molecules" tab, choose "Receptor" and place one on the canvas. Rename it "Cph8".
Regulate OmpRp with Cph8: From the "Regulation" tab, choose "Allosteric Inhibition" and then click on Cph8 and OmpRp. You can reshape the regulatory arrows and move the elements around the canvas as needed for clarity.
Add the Beta-Gal protein: From the "Molecules" tab, place an enzyme on the canvas and call it "BetaGal". Link it to the LacZ coding region using the "Protein Production" reaction.
Add the colorful small molecule: Place two more small molecules on the canvas. Connect them to your BetaGal protein using "Enzyme Catalysis" from the "Regulation" tab. Name the input molecule "SGal", and the output molecule "COLOR". Next, double-click on SGal to open a dialog box. Select the "Initial Conditions" tab and increase the concentration to 15.
Add a Chassis: From the "Compartments" tab, choose “Cell” and place one on the canvas. Move and resize the cell so it encloses the transcription factor and the reporter gene. Leave the Cph8 receptor in the cell membrane.
Add light: From the "Molecules" tab, choose "Small Molecule" and print one on the canvas. Rename it "Light" and connect it to Cph8 with an activation arrow from the "Reaction" tab.
Turn the light on: From the "Inputs" tab, choose "Step input" and click on the Light molecule. Next, find the cell compartment in the "Model Summary" list of components on the right. Click the arrow to expand its subcomponents, find the Light molecule, and expand it. Change the value of "step_time" to 50 (this will turn on the light halfway through the simulation, rather than right at the beginning).
Whew! Now we'll go on to simulate the photography system in action...
Simulating the bacterial photography system
Simulation output
Behind the shiny-looking front end of TinkerCell is some serious mathematical capability. We'll use the "Deterministic" simulator (i.e. we will be ignoring the random fluctuations that would occur in a real cell). Click the big green arrow in the top toolbar to run the system.
You should see a graph window and a second window with sliders. To clean up the graph by getting rid of some unnecessary lines, click on "Legend" in the graph window, and uncheck everything except Time, Light, Cph8, OmpRp, LacZ, BetaGal, and COLOR. (Everything else is either constant or an internal TinkerCell bookkeeping variable.) Take a few minutes to familiarize yourself with the output graph. You may want to answer discussion questions 1-3 at this step, instead of waiting until the end.
Tuning the system
Turn to the slider window and start changing numbers, making notes of what effects you see. (If you screw something up, you can always close the graph/slider windows and re-run the simulation with default values.) Many of the variables in the slider window have straightforward names, like "light_step_height", but some are more opaque. In general, things named "Kd" are constants governing the strength of a regulatory interaction. "Kcat" is the catalysis power of the BetaGal enzyme.
Try decreasing light_step_steepness, so that the light turns on gradually rather than all at once. Does this tell you more about how exactly the system changes state when its input changes?
Try changing the light's step input to a sine wave input, and change the frequency. What happens to the output when the frequency is high? When the frequency is low?
Next, decide on some specific changes you would like to make to the graph, and then see if you can find the right combination of sliders to make those changes. For example:
In reality, a bacterial photo takes some time to develop, but is stable once it's formed. Can you make the COLOR output accumulate more slowly? More quickly?
Can you change the total amount of color produced?
Can you get the model to output something that doesn't make any biological sense? Delete this question unless I can actually come up with at least one possible answer for it.
Putting it all together
Your teacher may ask you to answer some of the following questions.
What are some approximations / simplifications that you made as you built the model? (For example, leaving out the phosphorylated form of Cph8.) Do these matter?
What are the axes of the graph? What are the units of each quantity (concentration, rate, etc.)? (Check the listed units for each quantity in the summary menu on the right.) Reword this -- want to touch on the "arbitrary units" issue of TinkerCell.
Consider each line on the graph. Does it go up, down, or stay static in the first half of the simulation (light off)? Does it change at the time the light turns on? Does it go up, down, or stay static in the second half of the simulation (light on)?
Name four adjustments you made to the sliders, describe how they affected the shape of the lines on the graph, and why each adjustment made the difference that it did.
(advanced question) For each adjustment you just named, describe how you would carry out the same adjustment in the actual biological system. (Too advanced? Probably need to know some biochemistry for this...)
What are some of the drawbacks of this modeling approach? Where does the analogy between a TinkerCell canvas and a biological system break down, so that the model no longer reflects reality?
Did you encounter any bugs in TinkerCell? Are there features you would like to see? Describe each bug or feature thoroughly. Collect all the bug reports / feature requests as a class, and submit them to the TinkerCell development team.
Finally, was this modeling exercise worth it? Did it teach you about the system you're studying, suggest modifications of the system, or help you choose future experiments? Split this into two questions? I'm trying to get at both "what things would you like to try doing to the system" and "how did TinkerCell elucidate these things".
Part II. Electronic vs Biological Circuits
Circuit kit.
In this activity, we'll explore signaling in the context of an electrical circuit. As you work through this exercise, consider how the lessons learned from experimenting with an electronic circuit would map to the engineering of biological systems. You will be given a kit to construct this circuit.
Safety
Safety for you: In this exercise, you'll be working with circuits connected to a battery. Although you are unlikely to seriously injure yourself, you should make a habit of unplugging / powering-off the circuit before you touch it.
Safety for the circuit components:
Never directly connect the two battery terminals (+/power and -/ground) with only wire. This is called a "short circuit" and can damage or drain your battery.
Take note of which components require power to be applied in one direction and not the other. Applying power backwards can fry your components. Specifically:
The OpAmp has one pin for + power and one pin for ground.
The diodes (photodiode and LED) must have their positive legs toward power and their negative legs toward ground. Notice that the diodes are round except for one flat side, which indicates the negative leg (flat line looks like a minus sign).
Make sure not to connect your battery backwards. Use red for power and black/blue for ground.
Wires and resistors don't care which direction they are plugged in.
System design
A diagram of the electrical circuit that is analogous to the bacterial photography system. Circuit designed by Steve Wasserman, MIT
This system is a fairly simple one, consisting of only a few components. In contrast to the bacterial photography system in which the signal is propagated through protein activities, here signals are propagated as either voltage or current. When light hits the photodiode, it generates a current signal. The OpAmp takes in this current signal and produces a voltage, which signals the LED to produce light. As you can see in the schematic, the circuit contains the following parts:
Photodiode: a light sensor (analogous to the Cph8-OmpR signaling system). When light shines on the photodiode, its resistance decreases, and current flows through it.
OpAmp: a signal propagator (analogous to the transcription/translation machinery that translates an OmpR signal into synthesis of LacZ). More generally, an OpAmp is a logic device that detects and amplifies a difference between the currents into its plus and minus inputs. With the addition of the feedback resistor connecting the output to the minus input, the OpAmp translates an incoming current signal into an outgoing voltage signal.
Resistor: component which resists current flow by producing a voltage drop across it. The voltage equals the current times the resistance of the resistor; thus, the resistance sets the "gain" or amplifier strength of the system. By varying the resistance, we can vary the circuit's sensitivity to light. (The resistor is analogous to the strength of the promoters and ribosome binding sites in the biological system, which raise or lower the efficiency of LacZ production.)
LED: a device with a detectable output (analogous to LacZ). A voltage drop across its terminals turns the green-colored light on. (The small 820Ω resistor is placed in line with the LED to ensure that the current through the LED isn't too high, which can fry the LED. This small resistor has no direct analogue in the bacterial photography system.)
Photodiode (sensor)
OpAmp (logic)
Resistor (gain)
LED (actuator)
Intro to Breadboards
You will be building this circuit on a breadboard, which is a much cleaner way to construct circuits than just wiring everything together. Start by building a very simple, "Hello World" circuit to understand intuitively how breadboarding works. (If you have used a breadboard before, feel free to skip this section.)
Take a look at the rows of holes on your breadboard. In the middle, the holes are arranged in short rows of five. The five holes in each row are all connected to each other (via thin strips of metal inside the breadboard). On the sides are the rails, or long rows of holes marked with red or blue lines and a plus or minus sign. All the holes in a rail are connected to each other. Rails allow you to conveniently serve power/ground to many locations at once.
Example showing breadboard connections.
For example:
The purple wire and the orange wire are connected. The orange wire bridges the two separate halves of the breadboard.
The purple wire and the green wire are not connected.
Power is delivered to the red rail at the top of the breadboard via the red binding post, which connects to the battery holder. The short yellow wire, the purple wire, and the orange wire are all connected to power.
Ground is delivered to the blue rail at the bottom of the breadboard via the black binding post, which connects to the battery holder. The green wire is connected to ground.
Hooking up an LED
Our basic "Hello, World!" circuit.
Remember that the LED only allows current to flow through it in one direction. If you try to put current through it backwards, it won't work. (But it won't damage the LED either, so feel free to try!)
The resistor is needed to limit the current through the LED. Too much current can damage it. (The LEDs in this kit are strong enough that they won't burn out instantly if you connect them straight across the battery, but using a resistor is still recommended.) You could also put the resistor on the power side and the LED on the ground side; it makes no difference.
First, deliver power from the battery to the rails on either side of the breadboard. Use the binding posts to connect the battery leads to wires, and plug the wires into the rails. Unscrew the plastic part of the binding post, insert a lead and a wire into the hole, and tighten the plastic part. (Get a good connection -- make sure you are clamping down on a metal wire and not on the plastic insulation around each wire.)
Now plug in the LED and the resistor. Push in the wires firmly to make a good connection. You should see light. If not, check your connections, make sure your battery is not dead, etc.
Building the bacterial photography circuit
Finished circuit.
Power the breadboard: Connect the battery leads to wires using the binding posts. Connect the power wire to the red rail at the top of the breadboard, and the ground wire to the blue rail at the bottom. (Power off the breadboard before you continue building, by disconnecting the rails or snapping the battery out of its holder.)
Position the OpAmp across the trench in the breadboard.
Note the small dot or half-circle marking pin 1 or the "top" of the OpAmp, as shown in the connection diagram. Power the OpAmp by connecting its voltage source inputs to the power rails (pin 7 to +9V, pin 4 to ground).
Connect the OpAmp's plus input (pin 3) to ground.
Diagram showing the connection of each pin on the OpAmp. -IN = negative input, +IN = positive input, -Vs = negative voltage supply = ground, +Vs = positive voltage supply = +9V, OUT = output, NC = pin not connected to anything. (Reproduced from data sheet.)
Connect the OpAmp's minus input (pin 2) to the photodiode. Remember, the photodiode is polarized. It must be connected so that the leg under the flat side is to ground.
You'll make 2 connections to the OpAmp's output (pin 6). First, connect it to the LED and the small, 820 ohm resistor. Remember, the LED is polarized. It must be connected so that the leg under the flat side is to the resistor and the other leg is to power.
Next, connect the OpAmp's output (pin 6) to the large, 10 mega-ohm resistor. Connect the other end of the resistor to the OpAmp's minus input (pin 2). You will change the gain of the amplifier by varying the resistance at this point (using the large resistor, a wire for zero resistance, and no wire for infinite resistance).
Double check your connections with the circuit diagram above before you power it up.
Test your circuit by shining a light on the photodiode and seeing if the LED responds.
Finally, if desired, continue to the Exploring Gain exercise.
Discussion
Explain the role each component plays in the electronic circuit. Which part of the biological circuit does each represent?
No doubt, building this circuit was quicker and easier than actually assembling a biological circuit -- for example, you didn't have to wait for bacteria to grow, or spend time cutting and pasting wires the way you would cut and paste DNA to make a functional plasmid. What are some traits of these components, of the breadboard, or of electronics in general, that make electrical engineering easy in this way?
Every analogy has limitations. What are the limitations of the circuit you built as a model of the bacterial photography system? What could you do to make it more realistic?
Part III. U-do-it Bacterial Photograph
Decide what image you would like to develop as a bacterial photograph. Remember that the goal is to have each cell growing distinctly in the light or dark. Light can bounce around edges and may blur the resulting image if the black and white are highly intermingled. In general, it’s better to have a dark background and a light image rather than the other way around. Once you have decided on an image, generate a computer file with this image and print it to a transparency. To darken the dark parts of your photo, you might want to print it on two transparencies and use them both to mask the Petri dish. The diameter of the petri dish is less than 3 inches across so your image must be smaller than this.
Email info AT BioBuilder DOT org to say that a transparency is being sent, and in a few days, a jpg file with your bacterial photo, or the plate itself if that's possible, will be sent back to you.
