Beauchamp:CreateAFNIBRIKfromMR

Beauchamp Lab

• Home
• Lab Notebook
• Publications
• People/Projects/Media
• Teaching
• Positions
• Data Sharing
• RAVE

Previous step is How to Collect MRI Data and Use the Scanner Next step is Turning the raw data into AFNI BRIKs Overview We copy all data (from any scanner) to an analysis directory on the Beauchamp Lab server. This is usually in the format /Volumes/data/UT/XX Where "XX" is a unique two-letter code that corresponds to the experiment. Getting Data From the UT Philips Scanner if you are at UT The MRI data can be transferred from the scanner in a number of ways; the only fail-safe method is to take a removable USB drive to the scanner room and copy the data directly to it. Alternately, the data can be placed somewhere "in the cloud" by the scanner tech and then moved to the correct place on the server. One place is the UT NAS. Connect to the NAS by hitting Apple-K and then Login with your UT ID and password. Navigate to the correct directory and copy to the experiment directory. On the scanner, it may be necessary to use the IP address in windows format (Windows Explorer or My Computer, Tools, Map Network Drive): Another place the data could be placed is in a folder on our server. You must find it and move it to the correct location (experiment directory, "raw" subdirectory). The folder will be named by Vips (ask him for the name if you cannot find it) and is located on the server internal hard disk, as opposed to the RAID connected to the server. GUI Version. Make sure that both the "data" drive (RAID) AND "beauchamplab" (server internal hard disk) are mounted on your Mac. Apple-K to XXXXXXX and select both if they are not. Open one finder window and navigate to ms-nbafmri/beauchamplab and find the folder with your data in it. Move or copy it to the correct experiment directory. Command line version. Navigate to the correct directory. Then, copy to the correct location on the server as follows. Replace the sample directory name with the desired one; this is the name given by Vips. Be sure you have created the experiment directory, including the raw subdirectory, already. cp -r ZAP_081612/* /Volumes/Pegasus/data/UT/ZAP/raw/ More Notes Depending on how the data is exported from the scanner, the data will be one of three formats: NiFTI Format tms_10_10_1.nii This is the preferred format because it can be read by AFNI directly. PAR/REC Format tms_10_10_1.PAR tms_10_10_1.REC This is the native Philips format. The PAR file contains the data PARameters. The REC file contains the raw REConstructed data for the entire run. DICOM format IM_2048 Each file contains one image, so that one run has thousands of images in it. Method 1: Vips doesn't like this because it is too slow. Using a package called ExpanDrive https://secure.expandrive.com/ Vips can connect directly to a Mac server with scp (ssh must be enabled on the server). He will copy it to the "BeauchampServer" dirve mounted on the Philips console. This is a link to the ms-nbafmri server located at 139.52.4.123 (For Tim's data, it is copied to data on ike). The next step is to copy it from the ms-nbafmri server to the correct experiment directory. Here are the steps to do that: For ms-nbafmri ii is copied to the admin home directory (on the server hard disk) and needs to be copied to the correct location (on the Promise RAID). Use the Amazon/Gmail lab password. Find where the data is located. cd DATA ls Then, copy to the correct location on the server as follows. (Replace the sample directory name with the desired one; this is the name given by Vips). cp -r ZAP_081612 /Volumes/Pegasus/data/UT/ Method 2: Faster for Vips, but involves an extra step for us. Data can be copied to the NAS and then transferred from there to the server. On Windows, mount the NAS with On Macs, Apple-K and then For either case, log in with your UT user ID and password. OLDER: MR data can be sent directly from the Philips scanner to an external hard drive attached to bidwell. (For some reason, the scanner PC cannot connect to Ike or the RAID). The data will end up on bidwell on in /Volumes/Users/mri/data (which is a link to the "My Passport" external hard disk). Vips will usually put it in a subdirectory on bidwell e.g. The data should be copied to /data1 for analysis using this command: If you are not sure what directory to use, you can open a window to bidwell with the following command cd ~mri/data/DR_BEAUCHAMP_2010 ls exit Getting Data From the UT Philips Scanner if you are at Rice or somewhere else outside UT Vips will copy the data to the Beauchamp Lab server bidwell on (129.106.236.180) in /Volumes/Users/mri/data (which is a link to the "My Passport" external hard disk). Vips will usually put it in a subdirectory on bidwell e.g. ~mri/data/DR_BEAUCHAMP_2010/ZAE_042710 To log in to this machine from Rice, you must VPN onto the UT network, follow the instructions on http://its.uth.tmc.edu/vpn_home.htm Next, ssh to bidwell And navigate to the directory where the data is found. Finally, use the scp command to copy the desired data to the machine outside UT. This will only work if the target machine has an appropriate IP address (in a public domain). This can be tested by ping-ing the target machine. Don't forget the trailing colon, it is critical. How long does this take for a typical experiment (this one is 7 fMRI runs and 2 T1s, about 1 GB), start at Fri Jun 3 11:38:03 CDT 2011 finish at Fri Jun 3 11:44:47 CDT 2011 About 6 minutes total for 1 GB, not too bad. Getting Data from the BCM Siemens Scanners To save the data after you scan, follow these steps: Click on the experiment to export; can see all experiments in the Patient Browser (accessed with button in bottom right of numeric keypad that has folders on it) Click Transfer, Export Offline Select from the drop down menu (first item) Manually type in \Beauchamp to access our lab folder to try: Manually type in \Beauchamp\newdata this should copy into a folder called newdata, then rename with the current date and make a new newdata folder To transfer the data to our server: VPN into BCM, type navigate to the correct directory and copy to a "raw" directory on your desktop disconnect from VPN, reconnect to Beauchamp Lab server, copy raw directory to correct experiment directory To save to a flash drive: Export to Off-Line, Select flash drive, export To save to TABS (the Mac next to the console on 3T-5) where it can then be put on DropBox or elsewhere: Send to tabsSCP cd /Users/tabs/tabs/dicom The DCM files will be placed in a directory named with the date and time, e.g. Here is the old way: After you scan, the technologist will send you an e-mail with the link to the data. If necessary, make a new directory mkdir /Volumes/data1/UT/JL cd /Volumes/data1/UT/JL mkdir raw cd raw And then click on the link and download the data to this directory (called "raw" for ease of reference). The data is stored as an .iso file. Double click on the .iso file to open a window that lists the component data files (with .ima suffix). Click and drag these into the raw directory. Getting Data from other Scanners Data from other scanners will often be stored in DICOM or other formats. DICOM is the standard file format for storing medical data. Typically each scan is saved in a unique folder and each file represents a single slice. OsiriX is a free DICOM viewer for Macs and can be downloaded from the following URL: http://homepage.mac.com/rossetantoine/osirix/ OsiriX can often extract images from DICOM or other formats and write them out to a directory in standard DICOM format. Then, to3d is used to convert the extracted DICOM files to AFNI BRIK/HEAD files.