BME103:T930 Group 9

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Results)
Current revision (15:46, 15 November 2012) (view source)
(Protocols)
 
(6 intermediate revisions not shown.)
Line 142: Line 142:
#Save the images to the computer. <br>
#Save the images to the computer. <br>
#If the computer does not already have Image J installed, the program can be downloaded by going to http://rsb.info.nih.gov/ij/download.html <br>
#If the computer does not already have Image J installed, the program can be downloaded by going to http://rsb.info.nih.gov/ij/download.html <br>
-
#In Image J, go to file, open, and then select the desired picture. <br>
+
#In Image J, go to file, open, and then select the desired picture. <br><br>
-
<br><br>
+
 
 +
'''How to Analyze Pictures in Image J'''<br>
 +
#With the desired picture open, go to analyze, set measurements, and select Area Integrated Density and Mean Grey Value.<br>
 +
#Go to image, color, and then split screen.<br>
 +
#In the green channel, use the oval tool to draw an oval around the water drop.<br>
 +
#Go to analyze, measure, and save the results as an Excel file.<br>
 +
#To get background measurements, draw a similar-sized oval somewhere in the background. Then, go to analyze, measure, and save the results as an Excel file.<br><br>
'''ImageJ Software Processing Measurements'''  
'''ImageJ Software Processing Measurements'''  
Line 292: Line 298:
When considering scientific detection of the missense mutation itself, we have found that our DNA sequence rs17879961 is related to the condition of Breast and Colorectal Cancer. Therefore, in the case of PCR detection, the sequence for rs17879961 would be copied for by a primer. The primer starts the copying going forward and backward, with the primer that correlate to the strand of DNA; this primer identify the cancer sequence out of the DNA. Then, the patient would have that strand of DNA extracted and prepared for PCR amplification process. This preparation would include the use of primers, taq Polymerase, solution and dNTPs, and other necessary materials. This solution would be inserted into the PCR machine to be heated/cooled/heated. Eventually, the PCR process would yield multiple strands of the DNA that was initially placed and the SNP part that we had identified. A non-cancer DNA sequence would not produce a signal because the nucleotide variation where a primer would replicate DNA would be out of place; therefore, its process of DNA amplification would occur as normal. Only when we have a mutation, can we identify a signal from the DNA (assuming that we are attempting to detect a normal nucleotide sequence).<br><br>
When considering scientific detection of the missense mutation itself, we have found that our DNA sequence rs17879961 is related to the condition of Breast and Colorectal Cancer. Therefore, in the case of PCR detection, the sequence for rs17879961 would be copied for by a primer. The primer starts the copying going forward and backward, with the primer that correlate to the strand of DNA; this primer identify the cancer sequence out of the DNA. Then, the patient would have that strand of DNA extracted and prepared for PCR amplification process. This preparation would include the use of primers, taq Polymerase, solution and dNTPs, and other necessary materials. This solution would be inserted into the PCR machine to be heated/cooled/heated. Eventually, the PCR process would yield multiple strands of the DNA that was initially placed and the SNP part that we had identified. A non-cancer DNA sequence would not produce a signal because the nucleotide variation where a primer would replicate DNA would be out of place; therefore, its process of DNA amplification would occur as normal. Only when we have a mutation, can we identify a signal from the DNA (assuming that we are attempting to detect a normal nucleotide sequence).<br><br>
-
As mentioned previously, we studied that the cancer marker, rs17879961, in the PCR experiment was correlated to the Breast and Colorectal cancer, but to completely understand the extent of this cancer's SNP to the development of cancer, we need to take a look at the statistics that not only follow Baye's Rule, but also provide useful information about the spread of this type of cancer. Based on conditional probabilities from a population diversity in Finland where the tested sample was 180 people, we found that the frequency of this cancer found in Finland was 7.8%. The genotype of this sequence of C/T in this population was 1.1% and the genotype of T/T was found to be 98.9%.<br>
+
As mentioned previously, we studied that the cancer marker, rs17879961, in the PCR experiment was correlated to the Breast and Colorectal cancer, but to completely understand the extent of this cancer's SNP to the development of cancer, we need to take a look at the statistics that not only follow Baye's Rule, but also provide useful information about the spread of this type of cancer. Bayesian reasoning accounts for the prevalence, sensitivity, specificity and false positive rates of a disease in order to further understand that disease. Sensitivity is the likelihood that a person afflicted with the disease will test positive for it, while specificity is the likelihood that a person without the disease will test negative for it. Based on conditional probabilities from a population diversity in Finland where the tested sample was 180 people, we found that the frequency of this cancer found in Finland was 7.8%. The genotype of this sequence of C/T in this population was 1.1% and the genotype of T/T was found to be 98.9%.<br>
For more infomation, visit http://www.ncbi.nlm.nih.gov/projects/SNP/snp_ref.cgi?rs=17879961.<br><br>
For more infomation, visit http://www.ncbi.nlm.nih.gov/projects/SNP/snp_ref.cgi?rs=17879961.<br><br>
-
BONUS points: Use a program like Powerpoint, Word, Illustrator, Microsoft Paint, etc. to illustrate how primers bind to the cancer DNA template, and how Taq polymerases amplify the DNA. Screen-captures from the OpenPCR tutorial might be useful. Be sure to credit the source if you borrow images.
 
-
[[Image: BME103_Group9_RNA Primer Binding.jpg |1000px|thumb|Summary: This is an image of how RNA primers bind to the cancer DNA template during the replication process. [2]]] Source: [http://matthew2262.files.wordpress.com/2011/04/replication.jpg]<br>
+
[[Image: BME103_Group9_RNA Primer Binding.jpg |1000px|thumb|center|Summary: This is an image of how RNA primers bind to the cancer DNA template during the replication process. [2]]] Source: [http://matthew2262.files.wordpress.com/2011/04/replication.jpg]<br>
-
[[Image: BME103_Group9_Taq Polymerase.gif |500px|thumb|Summary: This is an image of how Taq polymerases amplify the DNA. [3]]] Source: [http://www2.le.ac.uk/departments/emfpu/genetics/explained/images/PCR-process.gif]<br>
+
[[Image: BME103_Group9_Taq Polymerase.gif |500px|thumb|center|Summary: This is an image of how Taq polymerases amplify the DNA. [3]]] Source: [http://www2.le.ac.uk/departments/emfpu/genetics/explained/images/PCR-process.gif]<br>
<br>For more information on the PCR DNA replication process, please visit this website: http://learn.genetics.utah.edu/content/labs/pcr/.
<br>For more information on the PCR DNA replication process, please visit this website: http://learn.genetics.utah.edu/content/labs/pcr/.
-
 
-
<br>
 
<br>
<br>
Line 310: Line 313:
==Results==
==Results==
-
<!--- Place two small Image J data images here. One showing the result of Water and the other showing the result of Calf Thymus DNA --->
+
'''Positive Test''' <br>
 +
[[Image:BME103 Group9 Positivetest.jpg‎|200px|]] <br><br>
 +
'''Negative Test''' <br>
 +
[[Image:BME103 Group9 Negativetest.jpg‎|200px|]]<br><br>
 +
'''The Patient Information'''<br>
 +
{|border="1" cellpadding="5"
 +
|-
 +
! scope="col" | Patient Identification Number
 +
! scope="col" | Gender
 +
! scope="col" | Age
 +
|-
 +
|31542
 +
|Male
 +
|55
 +
|-
 +
|52125
 +
|Female
 +
|55
 +
|}
 +
 
Line 318: Line 340:
| '''Sample''' || '''Integrated Density''' || '''DNA μg/mL''' || '''Conclusion'''
| '''Sample''' || '''Integrated Density''' || '''DNA μg/mL''' || '''Conclusion'''
|-
|-
-
| PCR: Negative Control || 138082.756 || 0.49 || NEG (borderline)
+
| PCR: Negative Control || 138082.756 || 0.49 || NEG - Water
|-
|-
-
| PCR: Positive Control || 214199.614 || 1.54 || POS
+
| PCR: Positive Control || 214199.614 || 1.54 || POS - Calf Thymus
|-
|-
-
| PCR: Patient 1 ID #####, rep 1 || 377121.108 || 2.70 || POS
+
| PCR: Patient 1 ID 31542, rep 1 || 377121.108 || 2.70 || POS
|-
|-
-
| PCR: Patient 1 ID #####, rep 2 || 311547.192 || 2.23 || POS
+
| PCR: Patient 1 ID 31542, rep 2 || 311547.192 || 2.23 || POS
|-
|-
-
| PCR: Patient 1 ID #####, rep 3 || 278870.460 || 1.00 || NEG
+
| PCR: Patient 1 ID 31542, rep 3 || 278870.460 || 1.00 || NEG
|-
|-
-
| PCR: Patient 2 ID #####, rep 1 || 253204.641 || 1.82 || POS
+
| PCR: Patient 2 ID 52125, rep 1 || 253204.641 || 1.82 || POS
|-
|-
-
| PCR: Patient 2 ID #####, rep 2 || 180120.594 || 1.29 || NEG
+
| PCR: Patient 2 ID 52125, rep 2 || 180120.594 || 1.29 || NEG
|-
|-
-
| PCR: Patient 2 ID #####, rep 3 || 606603.192 || 4.35 || POS
+
| PCR: Patient 2 ID 52125, rep 3 || 606603.192 || 4.35 || POS
|}
|}

Current revision

BME 103 Fall 2012 Home
People
Lab Write-Up 1
Lab Write-Up 2
Lab Write-Up 3
Course Logistics For Instructors
Photos
Wiki Editing Help
Image:BME494_Asu_logo.png

Contents

OUR TEAM

Devraj Patel Open PCR Machine Engineer and Research and Development Scientist
Devraj Patel
Open PCR Machine Engineer and Research and Development Scientist
Andrew Hensley  Experimental Protocol Planner
Andrew Hensley
Experimental Protocol Planner
Nathalie Vitale  Experimental Protocol Planner
Nathalie Vitale
Experimental Protocol Planner
Ojeen Korkes  Research and Development Scientist
Ojeen Korkes
Research and Development Scientist
Brandon Simmons  Open PCR Machine Engineer
Brandon Simmons
Open PCR Machine Engineer

LAB 1 WRITE-UP

Initial Machine Testing

The Original Design
Image:PCRMachineImage.png
This is an image of an Open PCR Machine (Polymerase Chain Reaction). This machine amplicifies the DNA by regulating the temperature of the DNA smaples both heating and cooling samples using its temperature regulating parts such as heat sink, fan and heated lid to the preset temperature and for the time set up beforehand using the set up program. This heating and cooling seperates the DNA strands and allows recombination of the DNA to occur with the primers added in the PCR tubes.


Experimenting With the Connections

When we unplugged part 3, the LCD, from part 6, the Open PCR circuit Board, the LCD on the machine turned off and no information appeared on the LCD screen.


When we unplugged the white wire that connects part 6, the Open PCR circuit Board, to part 2, the heat sink, the machine no longer accurately regulates and controls the temperature and result in malfunction of heating the PCR tubes.


Test Run

On October 25, 2012, we conducted our first test on our open PCR machine. We tested the machine to test the operation functionality. The initial test demonstrated the machine heat sink accurately controlled and displayed the preprogrammed temperature determined by the software on the computer. The overall successfullness of the machine was good, however it came with one difficulty, fluctuation of time to complete the preprogrammed cycles.




Protocols

Polymerase Chain Reaction
PCR, polymerase chain reaction, is a simple tool that one can use to focus in onto a segment of DNA and generate thousands to millions of copies of a particular DNA sequence. In PCR, everything relies heavily on the regulation and variation of temperature. By setting the PCR at specific temperatures, a chain of reactions can take place. Therefore, there are three steps in PCR cycle: denaturation, annealing, and extension. In the beginning, PCR should be heated to 95 degrees Celsius. This allows the double-stranded DNA to be separated and unwinded. Secondly, PCR should be cooled at 57 degrees Celsius because this allows a piece of DNA to bind to DNA product from the initial step. This is done through primer enzymes that allow polymerase to start synthesizing by recognizing and attaching to sequences that are complementary. Lastly, the extension step is where DNA product will continually add bases following the primers until it fully synthesize a new strand of DNA. This last step is done at 72 degrees Celsius. In the end, the outputs of these reactions yield up to millions of strands of DNA that can be examined to identify certain types of genes in diseases or utilized for scientific purposes.


Source: [1]



Steps to Run PCR

  1. Connect the PCR machine to the computer.
  2. Open the 'OpenPCR' program on the computer.
  3. Label the tubes. This information should include the patient number (1 or 2) or control (+ or -), as well as the replication number (1, 2, or 3).
  4. Prepare the experiment by inserting the reactants into the PCR tubes. These tubes will consist of the patients DNA, along with the other provided mixing components*. After filling each tube, put it into the chamber at the top of the machine.
  5. Close and tighten the lid of the chamber.
  6. Customize the settings in the 'Thermal Cycler' program to include three stages: Stage 1 - one cycle that will heat the reactants up to 95 degrees Celsius for three minutes, Stage 2 - 35 cycles that will heat the reactants to 95 degrees Celsius for 30 seconds, 57 degrees Celsius for 30 seconds, and 72 degrees Celsius for 30 seconds.
  7. Press start on the program to begin running the PCR.
  8. Collect and record data at the completion of the trial.


* Provided Mixing Components
a) TaqDNA polymerase (non-recombinant modified form)
b) MgCl2
c) dNTP's
d) reaction buffers (at optimal concentration for DNA template amplification)


Reagent Volume
Template DNA (20 ng) 0.2 μL
10 μM Forward Primer 1.0μL
10 μM Reverse Primer 1.0μL
GoTaq master mix 50μL
dH2O 47.8 μL
Total Volume 100.0 μL



The Patient Information

Patient Identification Number Gender Age
31542 Male 55
52125 Female 55


Flourimeter Measurements

Flourimeter Set-up

Flourimeter Assembly Procedure

  1. Place a glass slide on the device.
  2. Using a pipette, add two drops of water to the slide.
  3. Turn on the blue LED light, and adjust the slide so that the light shines directly through the center of the water drop.
  4. Adjust the camera settings on a smartphone as follows:
    • Turn off the flash
    • Set exposure to the highest setting
    • Set saturation to the highest setting
    • Set contrast to the lowest setting
  5. Place the smartphone on the phone holder and position it in front the of fluorimeter device.
  6. Cover the entire setup with a black box in order to create as dark of an environment as possible.
  7. Take a picture with the smartphone. For best results, set the camera timer on the smartphone in order to be able to take a picture with the box completely closed.


How to Open Pictures Using Image J

  1. Using the smartphone, email the images to someone in the group with a computer.
  2. From the computer, open the email and download the images.
  3. Save the images to the computer.
  4. If the computer does not already have Image J installed, the program can be downloaded by going to http://rsb.info.nih.gov/ij/download.html
  5. In Image J, go to file, open, and then select the desired picture.

How to Analyze Pictures in Image J

  1. With the desired picture open, go to analyze, set measurements, and select Area Integrated Density and Mean Grey Value.
  2. Go to image, color, and then split screen.
  3. In the green channel, use the oval tool to draw an oval around the water drop.
  4. Go to analyze, measure, and save the results as an Excel file.
  5. To get background measurements, draw a similar-sized oval somewhere in the background. Then, go to analyze, measure, and save the results as an Excel file.

ImageJ Software Processing Measurements

Sample Image or Background Area INTDEN RAWINTDEN
Negative Sample 1 6724 20.639 138777
Negative Background 1 6308 0.110 693
Patient 2 Sample 2 6943 31.042 215523
Patient 2 Background 2 6432 0.206 1326
Patient 2 Sample 3 4177 43.131 180160
Patient 2 Background 3 4177 0.009 39
Patient 2 Sample 4 8328 72.861 606790
Patient 2 Background 4 8328 0.022 180
DNA Calf Thymus & Sybrgreen Sample 5 3745 15.377 57587
DNA Calf Thymus & Sybrgreen Background 5 3725 0.029 107
Positive Sample 6 6014 74.302 446850
Positive Background 6 6014 0.017 103
Patient 1 Sample 7 4916 76.736 377325
Patient 1 Background 7 4916 0.023 112
Patient 1 Sample 8 4292 72.757 312275
Patient 1 Background 8 4594 0.158 728
Patient 1 Sample 9 7815 35.699 278990
Patient 1 Background 9 7815 0.015 114
Water Sample 10 4844 51.982 251803
Water Background 10 4784 0.010 47


Research and Development


Specific Cancer Marker Detection - The Underlying Technology
After studying how the polymerase chain reaction machine works and the results it yields, we have to study how the DNA processed can be used to identify any sort of disease. Specifically, the rs17879961 cancer-associated sequence will produce a DNA signal because of the single nucleotide variation in its gene code. Based on our study of the rs17879961 cancer-associated sequence, we found that the missense mutation in e gene code yields a positive identification marker for cancer when the a single nucleotide C changes to a single nucleotide T.

Original Code:
GGAAGTGGGTCCTAAAAACTCTTACA[C]TGCATACATAGAAGATCACAGTGGC

Modified Code: (due to SNP)
GGAAGTGGGTCCTAAAAACTCTTACA[T]TGCATACATAGAAGATCACAGTGGC

When considering scientific detection of the missense mutation itself, we have found that our DNA sequence rs17879961 is related to the condition of Breast and Colorectal Cancer. Therefore, in the case of PCR detection, the sequence for rs17879961 would be copied for by a primer. The primer starts the copying going forward and backward, with the primer that correlate to the strand of DNA; this primer identify the cancer sequence out of the DNA. Then, the patient would have that strand of DNA extracted and prepared for PCR amplification process. This preparation would include the use of primers, taq Polymerase, solution and dNTPs, and other necessary materials. This solution would be inserted into the PCR machine to be heated/cooled/heated. Eventually, the PCR process would yield multiple strands of the DNA that was initially placed and the SNP part that we had identified. A non-cancer DNA sequence would not produce a signal because the nucleotide variation where a primer would replicate DNA would be out of place; therefore, its process of DNA amplification would occur as normal. Only when we have a mutation, can we identify a signal from the DNA (assuming that we are attempting to detect a normal nucleotide sequence).

As mentioned previously, we studied that the cancer marker, rs17879961, in the PCR experiment was correlated to the Breast and Colorectal cancer, but to completely understand the extent of this cancer's SNP to the development of cancer, we need to take a look at the statistics that not only follow Baye's Rule, but also provide useful information about the spread of this type of cancer. Bayesian reasoning accounts for the prevalence, sensitivity, specificity and false positive rates of a disease in order to further understand that disease. Sensitivity is the likelihood that a person afflicted with the disease will test positive for it, while specificity is the likelihood that a person without the disease will test negative for it. Based on conditional probabilities from a population diversity in Finland where the tested sample was 180 people, we found that the frequency of this cancer found in Finland was 7.8%. The genotype of this sequence of C/T in this population was 1.1% and the genotype of T/T was found to be 98.9%.

For more infomation, visit http://www.ncbi.nlm.nih.gov/projects/SNP/snp_ref.cgi?rs=17879961.


Summary: This is an image of how RNA primers bind to the cancer DNA template during the replication process. [2]
Summary: This is an image of how RNA primers bind to the cancer DNA template during the replication process. [2]
Source: [2]
Summary: This is an image of how Taq polymerases amplify the DNA. [3]
Summary: This is an image of how Taq polymerases amplify the DNA. [3]
Source: [3]


For more information on the PCR DNA replication process, please visit this website: http://learn.genetics.utah.edu/content/labs/pcr/.


Results

Positive Test


Negative Test


The Patient Information

Patient Identification Number Gender Age
31542 Male 55
52125 Female 55


Sample Integrated Density DNA μg/mL Conclusion
PCR: Negative Control 138082.756 0.49 NEG - Water
PCR: Positive Control 214199.614 1.54 POS - Calf Thymus
PCR: Patient 1 ID 31542, rep 1 377121.108 2.70 POS
PCR: Patient 1 ID 31542, rep 2 311547.192 2.23 POS
PCR: Patient 1 ID 31542, rep 3 278870.460 1.00 NEG
PCR: Patient 2 ID 52125, rep 1 253204.641 1.82 POS
PCR: Patient 2 ID 52125, rep 2 180120.594 1.29 NEG
PCR: Patient 2 ID 52125, rep 3 606603.192 4.35 POS


KEY

  • Sample = The sample is the substance tested using the flourimeter, in the case of this lab the substances used are a positive control, negative control, 3 trials for patient one, and 3 trials for patient 2.
  • Integrated Density = Integrated density is the sum of the pixels in a given are, this is found by finding the product of the area and mean pixel value then subtracting the background.
  • DNA μg/mL = This is the concentration of DNA in the respective sample, this is calculated by multiplying the integrated density by 2 and dividing by the integrated density value of calf thymus.
  • Conclusion = A positive signal represents a sample that exhibited the same reaction to sybr green in the lab as our positive control; a negative signal represents a sample that exhibited the same reaction to sybr green as the negative control.


Personal tools