BME103:T930 Group 6

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
Line 137: Line 137:
Why does a cancer gene produce a positive result while a normal gene produces a negative?
Why does a cancer gene produce a positive result while a normal gene produces a negative?
 +
because

Revision as of 22:24, 1 November 2012

BME 103 Fall 2012 Home
People
Lab Write-Up 1
Lab Write-Up 2
Lab Write-Up 3
Course Logistics For Instructors
Photos
Wiki Editing Help
Image:BME494_Asu_logo.png

Contents

OUR TEAM

Name: Nicholas SterkowitzOpen PCR machine engineer
Name: Nicholas Sterkowitz
Open PCR machine engineer
Name: Dominic IlardiOpen PCR machine engineer
Name: Dominic Ilardi
Open PCR machine engineer
Name: Alexandra NazarenoExperimental Protocol Planner
Name: Alexandra Nazareno
Experimental Protocol Planner
Name: Amanda SweigExperimental Protocol Planner
Name: Amanda Sweig
Experimental Protocol Planner
Name: Taylor DeeganResearch and Development(s)
Name: Taylor Deegan
Research and Development(s)

LAB 1 WRITE-UP

(Please finish by 11/7/2012)

Initial Machine Testing

The Original Design
(Add image of the full OpenPCR machine here, from the Week 3 exercise. Write a paragraph description for visitors who have no idea what this is)

Open PCR
Open PCR
]

Experimenting With the Connections

When we unplugged (part 3) from (part 6), the machine ... (did what? fill in your answer)

When we unplugged the white wire that connects (part 6) to (part 2), the machine ... (did what? fill in your answer)


Test Run

(Write the date you first tested Open PCR and your experience(s) with the machine)




Protocols

Polymerase Chain Reaction

Polymerase Chain Reaction (PCR) is a biochemical process the replicates and amplifies a desired sequence of DNA. The original DNA strand is pulled apart and primer marks the location of the targeted DNA sequence for polymerase to begin replication of the complementary strands. This process is continued until there are an exponentially increasing amount of the desired strand, allowing it to be closely examined.The PCR reaction relies on thermal cycling, in which repeated cycles of cooling and heating the samples enable the enzymes to appropriately replicate the targeted strand, and carry out the processes previously described.

The Steps:

1. Obtain DNA sample and label them clearly.

2. Using a micro-pipette, transfer the proper amounts of forward primers, reverse primers, dNtP's and Taq Polymerase master mix to each the 8 labeled DNA sample tubes. Be sure to replace the pipette tip after every transfer to avoid contamination.

3. Place the DNA sample tubes into the Open PCR machine.

4. Close lid and tighten screw until it touches the tops of the tubes.

5. Program the machine to run the following cycles:

- Stage 1: 1 cycle, 95 degrees Celsius for 3 minutes

- Stage 2: 30 cycles, 95 degrees for 30 seconds, 57 degrees for 30 seconds, 72 degrees for 30 second

- Stage 3: 72 degrees for 3 minutes

- Final Hold: 4 degrees


PCR Master Mix Components

GoTaq® DNA Polymerase is supplied in 2X Colorless GoTaq® Reaction Buffer (pH 8.5), 400μM dATP, 400μM dGTP, 400μM dCTP, 400μM dTTP and 3mM MgCl2.


Reagent Volume
Temple DNA (20 ng) 0.2 μL
10 μM forward primer 1.0 μL
10 μM reverse primer 1.0 μL
GoTaq master mix 50.0 μL
dH2O 47.8 μL
Total Volume 100.0 μL

Patient Information

The eight samples that were tested consisted of a positive and negative control. The other six had three DNA samples from one patient and three DNA samples from the second patient. The first patient has an ID of 51919, and is a female that is fifty-four years of age. The second patient has an ID of 60627, and is also a female, but with an age of sixty-three.

Flourimeter Measurements

(Add your work from Week 3, Part 2 here)




Research and Development

Specific Cancer Marker Detection - The Underlying Technology

Polymerace chain reaction (PCR) is a biochemical technology that is used to amplify a specific piece of DNA by generating thousands to millions of copies of a particular DNA sequence. The method relies on thermal cycling by heating and cooling the DNA so that the double strands break apart and can be replicated.

What are the component of a PCR reaction?

Template DNA: A specific DNA sequence that is trying to be detected.

Primers: A short segment of DNA sequences that is complementary to the target DNA sequence and binds to the targeted nucleotides.

Taq Polymerase: An enzyme that is active at high temperature that begins at the primer and takes complementary nucleotides from the solution and binds them to the "unzipped" strands.

Magnesium Chloride: A cofactoe that attaches to the Taq Polymerase to affect the speed of the reaction.

dNTP's: Deoxynucleotide triphosphates; individual nucleotide bases in that solution that are attached to the replicated DNA strands by Taq Polymerase.

What happens during each step of the thermal cycle?

At 95Celsius: The DNA double helix "unzips" to reveal two complementary single strands.
At 57Celsius: Primers attach to the complementary template sequence forming one forward and one reverse primer.
At 72Celsius: Taq Polymerase starts at the primer and replicates a complementary strand of DNA using the individual nucleotide bases in the solution.

Why does a cancer gene produce a positive result while a normal gene produces a negative? because


(Add a write-up of the information discussed in Week 3's class)

(BONUS points: Use a program like Powerpoint, Word, Illustrator, Microsoft Paint, etc. to illustrate how primers bind to the cancer DNA template, and how Taq polymerases amplify the DNA. Screen-captures from the OpenPCR tutorial might be useful. Be sure to credit the source if you borrow images.)




Results

(Your group will add the results of your Fluorimeter measurements from Week 4 here)


Personal tools