BME103:T930 Group 1

BME 103 Fall 2012	Home People Lab Write-Up 1 Lab Write-Up 2 Lab Write-Up 3 Course Logistics For Instructors Photos Wiki Editing Help
OUR TEAM Joseph Heath: Research & Development Scientist & PCR Machine Engineer Jessica Kemper: Experimental Protocol Planner Maile Ravenkamp: Experimental Protocol Planner Nick Hool: PCR Machine Engineer Christian Boden: PCR Machine Engineer & Research & Development Scientist LAB 1 WRITE-UP Initial Machine Testing The Original Design This machine is called an Open PCR machine. PCR stands for polymerase chain reaction, and this machine helps us create specific strands of DNA. It can hold 16 tubes of DNA and is compatible with any computer that has the appropriate downloaded software. The machine goes through a series of steps to recreate the DNA. First, it heats up to break apart the DNA strands. Then, it cools down to allow polymer chains to attach to the target DNA sequence. Once the primers are attached, the machine will heat up again so that the protein in charge of DNA construction will activate and bind to the polymers and then start to build the DNA sequences that are targeted. This machine is capable of creating millions of segments of this specific DNA sequence in just a hour or two. This machine, like many others, can be improved but for standard use, this machine works fine as is. If we improve this machine, the process that the machine goes through will most likely be the same but the hardware of the Open PCR machine may be changed. For example, if we wanted to make the amount of time for each cycle shorter, we could improve the heating elements of the machine so that the heating and cooling will be faster and more effective. Experimenting With the Connections When we unplugged the mounting plate from the open PCR circuit board, the display screen on the PCR box did not work. When we unplugged the white wire that connects the open PCR circuit board to the heating block, there was no temperature reading on the display screen. Test Run (First Open PCR test: 10/25/12. We had a successful and simple run of PCR) Protocols Polymerase Chain Reaction Reagents and volumes used in PCR replication Flourimeter Measurements (Add your work from Week 3, Part 2 here) Samples Sample Labels and Patient Numbers Research and Development Specific Cancer Marker Detection - The Underlying Technology The r17879961 cancer-associated sequence (AAACTCTTACACTGCATACA) will produce a DNA signal because of its nucleotide variation (ACATTGC to ACACTGC). This T-C change results in an isoleucene to threonine substitution. In a study in Finland, patients with colorectal cancer (CRC), the most common cancer associated with the DNA sequence change, had the allele 7.8% of the time while patients without CRC had the allele in 5.3% of patients, showing a significantly higher association in CRC patients.[1] PCR detection will only give a signal if this allele is present. Results Sample Integrated Density DNA μg/mL Conclusion PCR: Negative Control E6 F6 G6 PCR: Positive Control E7 F7 G7 PCR: Patient 1 ID #####, rep 1 E8 F8 G8 PCR: Patient 1 ID #####, rep 2 E9 F9 G9 PCR: Patient 1 ID #####, rep 3 E10 F10 G10 PCR: Patient 2 ID #####, rep 1 E11 F11 G11 PCR: Patient 2 ID #####, rep 2 E12 F12 G12 PCR: Patient 2 ID #####, rep 3 E13 F13 G13 KEY Sample = Integrated Density = DNA μg/mL = Conclusion =