BISC219/F13: Lab 6

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(New page: {{Template:BISC219/F13}} <div style="padding: 10px; width: 720px; border: 5px solid #FF6600;"> == LAB 6 Mapping Continued: Making the males to be able to set up a test cross== You will tr...)
Current revision (13:14, 18 October 2013) (view source)
(To do in 3 days)
 
(16 intermediate revisions not shown.)
Line 11: Line 11:
We will use the double mutants and these male heterozygotes to perform a test cross in 3 days. This test cross is designed in such a way that we can distinguish the progeny of parental gametes from those of recombinant gametes PHENOTYPICALLY. Review the mapping project crosses that you diagrammed for homework and make sure you understand how and why our test cross allows this crucial differentiation. We will score the progeny of that test cross as either parental (WT or double mutants) or recombinant (Unc or Dpy single mutants) and use the Recombination Frequency (number of single mutants) to calculate map distance of our dpy gene of interest from the linked unc. This scoring and calculation will occur in the next lab.<BR>
We will use the double mutants and these male heterozygotes to perform a test cross in 3 days. This test cross is designed in such a way that we can distinguish the progeny of parental gametes from those of recombinant gametes PHENOTYPICALLY. Review the mapping project crosses that you diagrammed for homework and make sure you understand how and why our test cross allows this crucial differentiation. We will score the progeny of that test cross as either parental (WT or double mutants) or recombinant (Unc or Dpy single mutants) and use the Recombination Frequency (number of single mutants) to calculate map distance of our dpy gene of interest from the linked unc. This scoring and calculation will occur in the next lab.<BR>
-
'''To do in 3 days'''<BR>
+
=='''To do in 3 days'''==
-
'''FINALLY!!!''' Set up the crucial TEST CROSS: Return to lab and transfer 3-5 L4 double mutant hermaphrodites to each of 2 crossing plates. You will find the clean crossing plates in your lab day's box in the supply area in the back of the lab. Add 3-5 of the heterozygous males (phenotypically wild type) of genotype (++/ d u) that you created in your last cross to each of those cross plates with the double mutant hermaphrodites. Label these plates with your <font color="purple"> PURPLE </font color= "purple">Sharpie.Incubate all worms at 23C until your next lab period.
+
'''FINALLY!!!''' Set up the crucial TEST CROSS: Return to lab and transfer 3-5 L4 double mutant hermaphrodites to each of 2 crossing plates. You will find the clean crossing plates in your lab day's box in the supply area in the back of the lab. Add 3-5 of the heterozygous males (phenotypically wild type) of genotype (++/ d u) that you created in your last cross to each of those cross plates with the double mutant hermaphrodites. Label these 2 plates with your <font color="purple"> PURPLE </font color= "purple">Sharpie.Incubate all worms at 23C until your next lab period.
== Forward Genetics: Sequencing Analysis ==
== Forward Genetics: Sequencing Analysis ==
Line 53: Line 53:
<bR>
<bR>
'''What you need to do:'''<br>
'''What you need to do:'''<br>
-
To analyze your sequences, you will need to work with software that can read .abi and .seq files that are generated by automatic sequencers. If there is time, your instructor will show you our ABI automatic sequencer and explain its operation. The directions for using the DNAstar software by Lasergene to analyze your sequences are found at: [[Media:Instructions for DNA sequence analysis_1.doc]]
+
To analyze your sequences, you will need to work with software that can read .abi and .seq files that are generated by automatic sequencers. If there is time, your instructor will show you our ABI automatic sequencer and explain its operation. The directions for using the DNAstar software by Lasergene to analyze your sequences are found at: [[Media:Instructions for DNA sequence analysis F13 (1).doc]]
 +
 
 +
== Lab 6: Series 3-Reverse Genetics: Investigating Gene Function & Regulation Using RNAi ==
 +
TODAY you will start some preliminary work to begin our Series 3 investigation. To read more about it, go to [[BISC219/F13: RNAi General Information| Background Information on Project 3: Investigating Gene Regulation Using RNAi]] <br>
 +
In the age of genome sequencing we now know, or can make educated guesses about, the location of every gene in an organism's genome; however, this does not give us any information about the function of the gene product (protein) in the organism.  We can use reverse genetic analysis to help us solve this puzzle.  There are several tools in the reverse genetics toolbox:  directed mutation (point mutations or deletions), overexpression using transgenes, and gene silencing using knockout organisms or double stranded RNA (RNAi).  Only RNAi and overexpression have been perfected in ''C. elegans''.  Scientists still have not found a way to do ''in vivo'' homologous recombination in worms. <br><br>
 +
 
 +
We are going to use RNAi as our tool to investigate gene function via reverse genetics.  ''C. elegans'' is the first animal in which the process of RNAi was discovered.  A similar system was identified in plants years earlier but, curiously, that groundbreaking discovery was largely ignored by the scientific community until it was noticed in animal models.  We now know that RNA regulation in cells is a fundamental method of regulating gene expression in organisms ranging from microscopic ''C. elegans'' to humans.  Many labs are now working non-stop to develop treatments for many "incurable" human diseases using RNAi.<br><Br>
 +
 
 +
In this investigation for Series 3 that you will begin today, each pair of students will be given a strain of ''C. elegans'' that have been genetically manipulated to contain green fluorescent protein (GFP) under the control of the ''hsp-16.2'' promoter.  GFP is a 26.0 kDa protein comprised of 238 amino acids.  When exposed to blue/ultraviolet light the protein emits bright green fluorescence.  GFP traditionally refers to the protein first isolated from the jellyfish ''Aequorea victoria''.  Martin Chalfie, Osamu Shimomura, and Roger Y. Tsien were awarded the 2008 Nobel Prize in Chemistry for their discovery and development of the green fluorescent protein.  This protein has been used in many different organisms ranging from bacteria and simple eukaryotes like ''S. cerevisiae'' the budding yeast, to zebrafish, cats and rabbits to examine protein localization and often as a biosensor.  The DNA code for GFP is added to a gene of interest - usually on a plasmid - and then introduced into a cell.  For mammals that cell is usually an egg or an early embryo.  The DNA is then incorporated into the genome.  When the gene of interest is turned and transcribed so is the code for GFP.  The two genes are translated together and the resulting protein is the protein of interest with the GFP protein attached to it.  When the organism is exposed to blue/ultraviolet light any cell or part of a cell where that protein is present will glow green.<br><br>
 +
 
 +
The strain you will obtain today is called CL2070.  In this strain the DNA code for GFP immediately follows the promoter for ''hsp-16.2''.  ''hsp-16.2'' encodes a 16 kDa protein that is a member of the heat shock family of proteins.  The expression of these proteins is upregulated during heat shock or environmental stress.  HSP-16.2 protein is likely to function as a passive ligand temporarily preventing unfolded proteins from aggregating.<br><br>
 +
 
 +
== To Do Today ==
 +
#Obtain a plate of CL2070 worms from your instructor.
 +
#Examine the worms under the dissecting microscope.  What is different about this strain of worms than any other you have seen thus far?
 +
#Each pair should obtain 4 maintenance plates.  Label 2 of them with CL2070 and 15°C and the other 2 plates with CL2070 and 23°C.
 +
#Each pair should have a scalpel at their station.  Flame sterilize the scalpel in your Bunsen burner flame - both sides.  Let cool for 30 seconds.
 +
#Cut 4 squares out of your CL2070 plate, about 1 cm on each side.  Using the scalpel scoop out each square, one at a time, and flip it, worm side down, onto the plates you just labeled.  Each plate should have one square of worms.
 +
#Put your plates in the proper incubator to use next week.<BR>
 +
 
 +
=='''To Do in 3 Days'''==
 +
Please move 5 young, adult CL2070 worms from your chunked plates at 23C to new maintenance plates and put them back in the incubator at 23C. Be sure to label the 2 new plates CL2070 and 23C with the date. Put a rubber band around the two new cultures and add a piece of your team color tape with your initials, lab day, and date you set up the new plates. You do not have to transfer any of the 15C worms to new plates.
== Assignment ==  
== Assignment ==  
-
Remember to check the [[BISC219/F13:Assignments | Assignment section]] of the wiki for instructions about the graded assignment due in the next lab and check the Weekly Planner section of the [[BISC219/F13:Calendars/Planner| Calendar/Lab Planner]] for other work to accomplish before the next lab. Direct link to information on the written assignment due in Lab 7 is at  [[BISC219/F13: Assignment_Series2_Mapping Crosses | Assignment Mapping Crosses]].
+
Assignment information and rubric found at:  [[BISC219/F13: Assignment_Series2_DNA Sequencing]]
-
[[BISC219/F13: Assignment_Series2_DNA Sequencing]].
+
<div class=noprint>
<div class=noprint>
-
==Links to Labs& Project Info==
+
{{Template:BISC219/F13:Lab_Links}}
-
'''Series1:'''<BR>
+
 
-
[[BISC219/F13: Worm Info | Worm Info]] <br>
+
-
[[BISC219/F13: Gene Linkage | Lab 1: Worm Boot Camp & Sex-Linked or Autosomal Start]]<BR>
+
-
[[BISC219/F13: Lab 2 | Lab 2: Sex-Linked or Autosomal Finale]]<br>
+
-
'''Series2:'''<BR>
+
-
[[BISC219/F13: Gene Mapping Info | Background: Classical Forward Genetics and Gene Mapping]]<br>
+
-
[[BISC219/F13: Lab 2 Mutant Hunt | Lab 2: Mutant Hunt]]<br>
+
-
[[BISC219/F13: Lab 3  | Lab 3: Linkage Test Part 1]]<br>
+
-
[[BISC219/F13: Lab 4  | Lab 4: Linkage Test Part 2, Mapping and Complementation]]<br>
+
-
[[BISC219/F13: Lab 5  | Lab 5: Finish Complementation; Mapping Continued]]<br>
+
-
[[BISC219/F13: Lab 6 | Lab 6: DNA sequence analysis; Mapping Continued]]<BR>
+
-
[[BISC219/F13: Lab 7  | Lab 7: Complete Mapping: Score]]<br>
+
-
'''Series3:'''<BR>
+
-
[[BISC219/F13: RNAi General Information| Background Information on Project 3: Investigating Gene Regulation Using RNAi]] <br>
+
-
[[BISC219/F13: Media Recipes | Media Recipes]]<br>
+
-
[[BISC219/F13: RNAi Lab 7  | Lab 7: Identifying a bacterial colony containing our plasmid of interest  ]]<br>
+
-
[[BISC219/F13: RNAi Lab 8  | Lab 8: Creating the feeding strain of bacteria for RNAi]]<br>
+
-
[[BISC219/F13: RNAi Lab 9  | Lab 9: Induction of feeding strain to produce dsRNA and feeding worms]]<br>
+
-
[[BISC219/F13: RNAi Lab 10 | Lab 10: Phenotypic analysis of treated vs untreated worms]]<br>
+
-
[[BISC219/F13: RNAi Lab 11 | Lab 11: Writing Workshop]]<br>
+
-
[[BISC219/F13: RNAi Lab 12 | Lab 12: Writing Conferences]]<br>
+
</div>
</div>

Current revision

Contents

LAB 6 Mapping Continued: Making the males to be able to set up a test cross

You will transfer 3-4 L4 hermaphrodite true breeding double mutants to 2 separate cross plates. Then add 3-4 wild type males to each plate in order to create male heterozygotes (++/ d u).

To make sure you have fertile L4 double mutant hermaphrodites for the test cross that you will set up in 3 days, transfer a single double mutant from your true breeding plate to each of 2 separate maintenance plates.

Label the plates you will set up today with your PURPLE Sharpie. Incubate your worms at 23C for 3 days.

We will use the double mutants and these male heterozygotes to perform a test cross in 3 days. This test cross is designed in such a way that we can distinguish the progeny of parental gametes from those of recombinant gametes PHENOTYPICALLY. Review the mapping project crosses that you diagrammed for homework and make sure you understand how and why our test cross allows this crucial differentiation. We will score the progeny of that test cross as either parental (WT or double mutants) or recombinant (Unc or Dpy single mutants) and use the Recombination Frequency (number of single mutants) to calculate map distance of our dpy gene of interest from the linked unc. This scoring and calculation will occur in the next lab.

To do in 3 days

FINALLY!!! Set up the crucial TEST CROSS: Return to lab and transfer 3-5 L4 double mutant hermaphrodites to each of 2 crossing plates. You will find the clean crossing plates in your lab day's box in the supply area in the back of the lab. Add 3-5 of the heterozygous males (phenotypically wild type) of genotype (++/ d u) that you created in your last cross to each of those cross plates with the double mutant hermaphrodites. Label these 2 plates with your PURPLE Sharpie.Incubate all worms at 23C until your next lab period.

Forward Genetics: Sequencing Analysis

Once we know our gene's name or its mapped location on a chromosome we can sequencing a portion of our gene of interest to provide us with direct evidence of the nature of the mutation, specifically the base alteration in the mutants in comparison to the wild type sequence. Understanding the nature and extent of the change in the gene may allow us to pinpoint a functionally significant part of the gene product (usually a protein). Understanding the nature of the change in the polypeptide sequence of the protein is useful in understanding how gene products function in organisms. For example, if a single point mutation causes an amino acid to change from a hydrophobic to a hydrophilic R group, or a flexible to an inflexible amino acid, the entire protein could misfold. As you know, shape is crucially important to function in enzymes, in DNA binding proteins, and in other proteins, all of which can have important regulatory functions in the organism.

Chain Termination DNA Sequencing (also called Sanger sequencing):
There is a nice animation of this process done by the Dolan DNA center at: | http://www.dnalc.org/resources/animations/sangerseq.html.

There are three major steps in a sequencing reaction, which are repeated for 25 cycles in a thermocycler:

  1. Denaturation at 94°C: During the denaturation, the double strand melts open to single stranded DNA and all enzymatic reactions stop, including the extension from the previous cycle.
  2. Annealing at 50°C: In each sequencing reaction, a specific primer is required. This primer is a short sequence of bases complementary to a region of the plasmid upstream of the target gene. The primer will anneal and stay, we hope, only at one position on the single stranded DNA template. In sequencing reactions there is only one strand copied whereas, in PCR, two primers are used so both strands of the DNA template are copied. The primer jiggles around, caused by the Brownian motion. Ionic bonds are constantly formed and broken between the single stranded primer and the single stranded template. The more stable bonds last a little bit longer (primers that fit exactly) and on that small section of double stranded DNA (template and primer), the polymerase can attach and starts copying the template. Once there are a few bases built in, the ionic bond is so strong between the template and the primer, that it does not break anymore.
  3. Extension at 60°C: Sixty degrees is the ideal working temperature for polymerase activity in sequencing even though, normally, it is 72 °C. Because the growing strand must incorporate ddNTP's which are chemically modified with a fluorescent label, the temperature is lowered so it has time to incorporate the 'strange' molecules. Well designed primers, where there are a few bases built in, already have a stronger ionic attraction to the template than the forces breaking these attractions. Primers that are on positions with no exact match, come loose again and don't give an extension of the fragment. The bases (complementary to the template) are coupled to the primer on the 3'side (adding dNTP's or ddNTP's from 5' to 3', reading from the template from 3' to 5' side, bases are added complementary to the template). When a ddNTP is incorporated, the extension reaction stops because a ddNTP contains a H-atom on the 3rd carbon atom (dNTP's contain a OH-atom on that position). Since the ddNTP's are fluorescently labeled, it is possible to detect the color of the last base of this fragment on an automated sequencer.


Image:Sequencing steps.jpg



Because only one primer is used, only one strand is copied during sequencing, there is a linear (not log as in PCR) increase of the number of copies of one strand of the gene. Therefore, there has to be a large number of copies of the gene in the starting mixture for sequencing. If there are 1000 copies of the wanted gene before the cycling starts, after one cycle there will be 2000 copies: the 1000 original templates and 1000 complementary strands with each one fluorescent label on the last base. After two cycles, there will be 2000 complementary strands, three cycles will result in 3000 complementary strands and so on. Linear amplification during sequencing reactions explains why we have to start with an exponential amplification of the gene of interest in a polymerase chain reaction to get lots of copies of our gene BEFORE we do the sequencing. Both sequencing and polymerase chain reactions require short sequences of DNA called primers to direct the specificity of the amplification to only the gene of interest or a part of the gene of interest. Primers must be designed to anneal to a short section of DNA on each strand adjacent to the section of the genome you want to copy. This means that you MUST know the sequence of the DNA near or of your gene of interest. Fortunately the entire C. elegans genome has been sequenced; therefore we can use Wormbase to locate where we want to start sequencing (by gene name or map location), find the sequence of the wild type form of the gene, and design primers to anneal at the proper places and to direct the specificity of the sequencing of our mutant gene. Note that you needed to complete either the mapping or the complementation analysis before DNA sequencing of the mutated gene so that we could look up its sequence in Wormbase and design and order short sequences of DNA that will anneal and copy that gene only or a section of that gene.

Image:Linear amplification.jpg


What your instructor did for you:
Due to time restraints, your instructor did the preparation of the worm DNA for sequencing (digestion of the Dpy worm to release the DNA & amplification and purification of the gene of interest by PCR with primers designed from the Wormbase sequence of the gene of interest). She then sent away the purified PCR product (amplified mutant gene) and the same primers to a commercial sequencing facility where they did chain termination (Sanger) sequencing reactions from those primers and our template DNA (the PCR product). They then used an automatic sequencer to separate the fluorescently labeled gene fragments by size, from smallest to largest numbers of bases, and a laser read the colors on the end of each fragment. A computer turned that information into .abi or .seq files. Those files of the mutant sequence, along with reference files of the wild type version of the gene, are posted to a folder on the Desktop of the lab computers. They are now available for you to analyze in your effort to functionally characterize the gene associated with the Dpy phenotype with which we began.

Steps in sequencing a C. elegans gene:
1. Digest the tough outer cuticle.
          Add worms to a mixture of 10 mM Tris, 50 mM KCl, 1.5 mM MgCl2, pH 8.3, with 10 mg/ml Proteinase K.
          Freeze the worms at -80°C for 15 minutes
          Incubate at 65°C for 1 hour to digest the cuticle and then at 95°C for 15 minutes to denature the Proteinase K.
2. Amplify the gene of interest by Polymerase Chain Reaction (PCR) using primers designed to amplify only this gene or a part of this gene.
          Add dNTPs to a final concentration of 0.2 mM and primers to a final concentration of 0.4 mM each.
          Add Taq according to manufacturer's instructions.
          Determine the proper reaction conditions for your primers and gene size.
          After amplification check for success via agarose gel electrophoresis.
3. Purify the product and send for sequencing
          Remove all impurities and chemicals from the PCR product using a Qiagen PCR Purification Kit
          following manufacturer's instructions.
          Quantify DNA concentration.
          Send proper concentration of DNA and primers to company for sequencing. Primers were designed from looking up the gene of interest (or ORF region)'s sequence in WormBase and figuring out complementary short sequences at the beginning and end of the region we want to sequence. We have used Genewizas our commercial sequencing facility.

What you need to do:
To analyze your sequences, you will need to work with software that can read .abi and .seq files that are generated by automatic sequencers. If there is time, your instructor will show you our ABI automatic sequencer and explain its operation. The directions for using the DNAstar software by Lasergene to analyze your sequences are found at: Media:Instructions for DNA sequence analysis F13 (1).doc

Lab 6: Series 3-Reverse Genetics: Investigating Gene Function & Regulation Using RNAi

TODAY you will start some preliminary work to begin our Series 3 investigation. To read more about it, go to Background Information on Project 3: Investigating Gene Regulation Using RNAi
In the age of genome sequencing we now know, or can make educated guesses about, the location of every gene in an organism's genome; however, this does not give us any information about the function of the gene product (protein) in the organism. We can use reverse genetic analysis to help us solve this puzzle. There are several tools in the reverse genetics toolbox: directed mutation (point mutations or deletions), overexpression using transgenes, and gene silencing using knockout organisms or double stranded RNA (RNAi). Only RNAi and overexpression have been perfected in C. elegans. Scientists still have not found a way to do in vivo homologous recombination in worms.

We are going to use RNAi as our tool to investigate gene function via reverse genetics. C. elegans is the first animal in which the process of RNAi was discovered. A similar system was identified in plants years earlier but, curiously, that groundbreaking discovery was largely ignored by the scientific community until it was noticed in animal models. We now know that RNA regulation in cells is a fundamental method of regulating gene expression in organisms ranging from microscopic C. elegans to humans. Many labs are now working non-stop to develop treatments for many "incurable" human diseases using RNAi.

In this investigation for Series 3 that you will begin today, each pair of students will be given a strain of C. elegans that have been genetically manipulated to contain green fluorescent protein (GFP) under the control of the hsp-16.2 promoter. GFP is a 26.0 kDa protein comprised of 238 amino acids. When exposed to blue/ultraviolet light the protein emits bright green fluorescence. GFP traditionally refers to the protein first isolated from the jellyfish Aequorea victoria. Martin Chalfie, Osamu Shimomura, and Roger Y. Tsien were awarded the 2008 Nobel Prize in Chemistry for their discovery and development of the green fluorescent protein. This protein has been used in many different organisms ranging from bacteria and simple eukaryotes like S. cerevisiae the budding yeast, to zebrafish, cats and rabbits to examine protein localization and often as a biosensor. The DNA code for GFP is added to a gene of interest - usually on a plasmid - and then introduced into a cell. For mammals that cell is usually an egg or an early embryo. The DNA is then incorporated into the genome. When the gene of interest is turned and transcribed so is the code for GFP. The two genes are translated together and the resulting protein is the protein of interest with the GFP protein attached to it. When the organism is exposed to blue/ultraviolet light any cell or part of a cell where that protein is present will glow green.

The strain you will obtain today is called CL2070. In this strain the DNA code for GFP immediately follows the promoter for hsp-16.2. hsp-16.2 encodes a 16 kDa protein that is a member of the heat shock family of proteins. The expression of these proteins is upregulated during heat shock or environmental stress. HSP-16.2 protein is likely to function as a passive ligand temporarily preventing unfolded proteins from aggregating.

To Do Today

  1. Obtain a plate of CL2070 worms from your instructor.
  2. Examine the worms under the dissecting microscope. What is different about this strain of worms than any other you have seen thus far?
  3. Each pair should obtain 4 maintenance plates. Label 2 of them with CL2070 and 15°C and the other 2 plates with CL2070 and 23°C.
  4. Each pair should have a scalpel at their station. Flame sterilize the scalpel in your Bunsen burner flame - both sides. Let cool for 30 seconds.
  5. Cut 4 squares out of your CL2070 plate, about 1 cm on each side. Using the scalpel scoop out each square, one at a time, and flip it, worm side down, onto the plates you just labeled. Each plate should have one square of worms.
  6. Put your plates in the proper incubator to use next week.

To Do in 3 Days

Please move 5 young, adult CL2070 worms from your chunked plates at 23C to new maintenance plates and put them back in the incubator at 23C. Be sure to label the 2 new plates CL2070 and 23C with the date. Put a rubber band around the two new cultures and add a piece of your team color tape with your initials, lab day, and date you set up the new plates. You do not have to transfer any of the 15C worms to new plates.

Assignment

Assignment information and rubric found at: BISC219/F13: Assignment_Series2_DNA Sequencing

Personal tools